A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Springdale, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Springdale
We found 23 appliance repair companies within 30 miles of Springdale. 8 list an address in Springdale, and the rest are spread across Fayetteville (6), Rogers (2), and Bella Vista (2). The farthest listed company is about 29 miles out. No company within 90 miles of Springdale mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is ABC APPLIANCE REPAIR, about 1.2 miles away. The 19 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.2, 1.5, 1.8 |
|---|---|
| Repair companies inside 30 miles | 23 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Mention GE | 0 |
| Mention washer work | 7 |
| Open on Saturdays (per listing) | 11 |
The leading options for Springdale are Mr. Appliance of Springdale and Rogers (13.5 miles away, based in Bentonville, 4.9 stars from 782 reviews); Mr. Appliance of Fayetteville, AR (8.7 miles away, based in Fayetteville, 4.8 stars from 492 reviews); Sears Appliance Repair (4.3 miles away, based in Fayetteville, 4.4 stars from 134 reviews, lists Saturday hours); ALL-IN appliance repair (22.7 miles away, based in Winslow, 4.9 stars from 112 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
Signs Your GE Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Keeping a GE Washer Running
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Springdale
Most washer calls in Springdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
In Arkansas, you can check a license with the Arkansas Department of Health Protective Health Codes licensee search (plumbing and gas fitter licenses) or report a problem to the Arkansas Attorney General, Consumer Protection Division.
Before You Book in Springdale
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Springdale, AR
Is my GE washer worth repairing?
Why is my washer leaking?
Is this GE customer service?
Other Washer Repair in Springdale
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Springdale technician bring the right parts.