If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Malvern, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Malvern
We found 40 appliance repair companies within 60 miles of Malvern. 1 list an address in Malvern, and other nearby bases include Little Rock (21), North Little Rock (8), and Hot Springs (4). Distances run up to about 42 miles. None of the repair companies near Malvern name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Dixson Services is the nearest, roughly 5.4 miles from Malvern. Across 17 rated companies, the average public rating is 4.1 stars. Malvern is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 47 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 6 |
| Repair companies inside 60 miles | 60 |
| Three nearest companies, miles away | 5.4, 13.0, 13.4 |
| Mention GE | 0 |
| Mention washer work | 7 |
First up for Malvern: Chuck's Appliance Repair (13.6 miles away, based in Hot Springs, 4.2 stars from 95 reviews, lists Saturday hours); Sears Appliance Repair (19.5 miles away, based in Benton, 4.4 stars from 299 reviews, lists Saturday hours); A-Tech Appliance Service (40.3 miles away, based in Little Rock, 4.6 stars from 187 reviews); Central One Service (35.9 miles away, based in Little Rock, 4.7 stars from 1,997 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Owner Care for GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Laundry Notes for Malvern, AR
Most washer calls in Malvern come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
In Arkansas, you can check a license with the Arkansas Department of Health Protective Health Codes licensee search (plumbing and gas fitter licenses) or report a problem to the Arkansas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Malvern
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Malvern, AR
Is my GE washer worth repairing?
What stops a washer from spinning?
Where is the water under my washer coming from?
More Washing Machine Repair in Malvern, AR
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.