If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Sapulpa, with those that mention Frigidaire first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Frigidaire Washer Repair Near Sapulpa
We found 35 appliance repair companies within 30 miles of Sapulpa. 1 list an address in Sapulpa, and other nearby bases include Tulsa (18), Owasso (4), and Broken Arrow (3). Nearest on the list: Holmes Heat & Air / Appliance Service, around 1.8 miles out. No company within 90 miles of Sapulpa mentions Frigidaire by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 31 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Frigidaire | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Three nearest companies, miles away | 1.8, 6.7, 7.1 |
| Repair companies inside 30 miles | 35 |
| Listing Saturday hours | 18 |
| Name washers or washing machines in their listing | 12 |
At the top of the Sapulpa list: Mr. Appliance of Metro Tulsa (13.9 miles away, based in Tulsa, 4.8 stars from 1,114 reviews); CJ Appliance Repair Tulsa (13.5 miles away, based in Tulsa, 4.9 stars from 666 reviews); Sears Appliance Repair (16.9 miles away, based in Broken Arrow, 4.6 stars from 185 reviews, lists Saturday hours); Sears Appliance Repair (12.7 miles away, based in Tulsa, 4.6 stars from 332 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines and Features
What a Frigidaire Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
What Frigidaire Says to Check First
- Washer won't start. First confirm the washer is sitting level. Source: Frigidaire - What should I do if my washer does not start?
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
When to Call for Frigidaire Washer Repair
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Sapulpa
Care Frigidaire Recommends for Its Washers
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Sapulpa
Most washer calls in Sapulpa come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Before You Book in Sapulpa
- How often do you repair Frigidaire washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Frigidaire Washer Repair FAQs: Sapulpa, OK
Where is the water under my washer coming from?
Why does my front-load washer smell?
Which Sapulpa technicians work on Frigidaire?
Why won't my washer spin?
Other Washer Repair in Sapulpa
Frigidaire Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.