A Frigidaire washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Ham Lake list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Frigidaire Washer Repair Near Ham Lake
Within 30 miles of Ham Lake there are 40 appliance repair companies in our data. 3 list an address in Ham Lake, and other nearby bases include Blaine (5), Minneapolis (5), and Forest Lake (3). The farthest listed company is about 19 miles out. None of the repair companies near Ham Lake name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Appliance Solutions, about 1.7 miles away. Across 22 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Ham Lake. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.7, 1.9, 3.0 |
|---|---|
| Open on Saturdays (per listing) | 47 |
| Name washers or washing machines in their listing | 10 |
| Mention Frigidaire | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Repair companies inside 30 miles | 60 |
The leading options for Ham Lake are Omega Force Appliance Repair (17.6 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Sears Appliance Repair (11.6 miles away, based in Forest Lake, 4.6 stars from 201 reviews, lists Saturday hours); Sears Appliance Repair (17.8 miles away, based in Maplewood, 4.5 stars from 235 reviews, lists Saturday hours); Appliance Solutions (1.7 miles away, 4.4 stars from 440 reviews, lists Saturday hours).
Frigidaire Washer Lines Technicians Work On
What Makes Frigidaire Washer Repairs Different
A top-load washer will not spin with the lid open, so an open lid can look like a drain problem. Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
What Frigidaire Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
- Lid won't unlock. Stop the washer and give the lid lock one to three minutes to release, since the lid stays locked during spin. Source: Frigidaire - Top Load washer lid will not open
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Signs Your Frigidaire Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
- An error code on the display
What a Washing Machine Technician Checks
Owner Care for Frigidaire Washers
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
Budgeting for a Frigidaire Washer Repair
Price the repair before replacing a Frigidaire washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Ham Lake
Most washer calls in Ham Lake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Questions to Ask a Ham Lake Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Frigidaire Washer Repair FAQs: Ham Lake, MN
Is this Frigidaire customer service?
What should I do about a Frigidaire error code?
Why won't my washer spin?
Related Repair Pages for Ham Lake
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.