Most Frigidaire washer repairs in St. Paul involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The St. Paul list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, St. Paul MN
40 repair companies serve St. Paul from within 30 miles. The rest are spread across Minneapolis (9), St Paul (8), and West St Paul (3). Nearest on the list: Smart Care Solutions, around 0.5 miles out. None of the repair companies near St. Paul name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 26 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from St. Paul. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 20 |
|---|---|
| Mention Frigidaire | 0 |
| Mention washer work | 9 |
| Open on Saturdays (per listing) | 46 |
| Three nearest companies, miles away | 0.5, 1.3, 1.9 |
| Companies within 30 miles | 60 |
At the top of the St. Paul list: Omega Force Appliance Repair (2.3 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Super Care Appliance Repair (3.5 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); Sears Appliance Repair (7.0 miles away, based in Maplewood, 4.5 stars from 235 reviews, lists Saturday hours); Shortie's Appliances (8.7 miles away, based in Oakdale, 4.7 stars from 178 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
What Makes Frigidaire Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
What Frigidaire Says to Check First
- Washer not filling. Make sure both the hot and cold supply faucets are fully open. Source: Frigidaire - Top Load washer not filling with water properly
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Frigidaire Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
What Gets Fixed on a St. Paul Washer Call
Keeping a Frigidaire Washer Running
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Repair Cost Ranges
Price the repair before replacing a Frigidaire washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Laundry Notes for St. Paul, MN
Most washer calls in St. Paul come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Hiring a Washer Repair Company in St. Paul
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
Frigidaire Washer Repair FAQs: St. Paul, MN
What stops a washer from spinning?
What should I do about a Frigidaire error code?
Should I repair or replace my Frigidaire washer?
Why is my washer leaking?
Other Washer Repair in St. Paul
More Frigidaire Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Frigidaire repair.