If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Camano
40 repair companies serve Camano from within 30 miles. Other nearby bases include Everett (15), Lynnwood (7), and Lake Stevens (4). Distances run up to about 27 miles. Nearest on the list: Whidbey Appliance Service, around 12.9 miles out. None of the repair companies near Camano name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 33 rated companies, the average public rating is 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention washer work | 12 |
|---|---|
| Open on Saturdays (per listing) | 34 |
| Repair companies inside 30 miles | 50 |
| Distance to the three closest (mi) | 12.9, 13.8, 15.1 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Mention Electrolux | 0 |
Closest matches for Camano: Appliance Mechanics (20.8 miles away, based in Lake Stevens, 4.9 stars from 445 reviews); Ace Appliance Service (23.5 miles away, based in Everett, 5.0 stars from 322 reviews); Smartfix Appliance (21.8 miles away, based in Lake Stevens, 5.0 stars from 102 reviews, lists Saturday hours); Appliance Fixers (27.3 miles away, based in Bothell, 4.9 stars from 270 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
What Camano Owners Should Know
Most washer calls in Camano come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Camano
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Camano, WA
Why won't my washer spin?
Why is my washer leaking?
How do I get rid of a washer mildew smell?
What should I do about a Electrolux error code?
Other Washer Repair in Camano
Electrolux Washer Repair in Nearby Cities
Nearby Towns Served From Camano
The technicians listed for Camano also cover smaller towns nearby, including Stanwood. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.