Serving Stanwood, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Stanwood, WA

A local list of washer repair companies near Stanwood, WA, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Stanwood?
Tell us the brand and the problem and we will connect you with a technician near Stanwood.
☎(866) 293-4411
✓12 companies listed for Stanwood✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. Below are the companies within reach of Stanwood, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving Stanwood, WA

Within 30 miles of Stanwood there are 37 appliance repair companies in our data. Other nearby bases include Everett (15), Lynnwood (7), and Lake Stevens (4). Distances run up to about 29 miles. Nearest on the list: Appliance Repair Guys, around 10.1 miles out. 10 list washing machine or washer work specifically. Rated companies nearby average 4.7 stars across 31 businesses.

Washer & Dryer Repair
Smartfix Appliance
8607 20th St SE UNIT B, Lake Stevens, WA 98258
21.2 mi from Stanwood
★★★★★ 5.0 (102 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Mechanics
7304 10th St SE A-101, Lake Stevens, WA 98258
20.3 mi from Stanwood
★★★★★ 4.9 (445 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
18600 Alderwood Mall Pkwy, Lynnwood, WA 98037
28.9 mi from Stanwood
★★★★½ 4.7 (413 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Fixers
18114 19th Dr SE, Bothell, WA 98012
29.1 mi from Stanwood
★★★★★ 4.9 (270 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fast Appliances Repair
5700 154th Pl SW, Edmonds, WA 98026
26.7 mi from Stanwood
★★★★★ 4.9 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Ace Appliance Service
13022 Ash Way Unit B, Everett, WA 98204
25.6 mi from Stanwood
★★★★★ 5.0 (322 reviews)
Mentions washers
Washer & Dryer Repair
Same Day Appliances Repair LLC
12115 19th Ave SE, Everett, WA 98208
25.5 mi from Stanwood
★★★★½ 4.3 (88 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Orca Appliance Services
16611 48th Ave W Unit A2, Edmonds, WA 98026
27.5 mi from Stanwood
★★★★★ 4.8 (146 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Everett
5133 134th St SE, Everett, WA 98208
26.8 mi from Stanwood
★★★★★ 4.9 (54 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Super Appliance Repair
11400 Airport Rd Ste 200, Everett, WA 98204
24.5 mi from Stanwood
★★★★★ 5.0 (7 reviews)
Mentions washers
Appliance Repair
A-Service: Heating, Cooling & Appliance Repair Arlington
7808 Boreal Ct, Arlington, WA 98223
11.8 mi from Stanwood
★★★★★ 4.9 (170 reviews)
Saturday hours
Appliance Repair
1 CALL REFRIGERATION & APPLIANCE REPAIR LLC
15001 35th Ave W, Lynnwood, WA 98087
26.6 mi from Stanwood
★★★★★ 4.9 (215 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Stanwood, WA
Mention a major washer brand0
Companies within 30 miles37
Listing Saturday hours25
Distance to the three closest (mi)10.1, 11.8, 12.5
Rated 4.5 stars or higher (10+ reviews)20
Mention washer work10

At the top of the Stanwood list: Smartfix Appliance (21.2 miles away, based in Lake Stevens, 5.0 stars from 102 reviews, lists Saturday hours); Appliance Mechanics (20.3 miles away, based in Lake Stevens, 4.9 stars from 445 reviews); Sears Appliance Repair (28.9 miles away, based in Lynnwood, 4.7 stars from 413 reviews); Appliance Fixers (29.1 miles away, based in Bothell, 4.9 stars from 270 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Stanwood
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Musty or mildew smell from the drum or door seal
  • Grinding or roaring noise that rises with spin speed
  • Water left in the drum after the cycle
  • An error code on the display

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

What Gets Fixed on a Stanwood Washer Call

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not filling with water.

Leaks and Safe Shutoff

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Stanwood, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Stanwood, WA

Most washer calls in Stanwood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Before You Book in Stanwood

  • Do you work on front-load and top-load washers, or only one type?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Stanwood, WA

Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Find Your Washer Brand in Stanwood

Washing Machine Repair Near Stanwood

Before you call a Stanwood technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech