A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Columbus, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Columbus OH
40 repair companies serve Columbus from within 30 miles. 32 of them are based in Columbus itself, and the rest are spread across Upper Arlington (2), Bexley (1), and Whitehall (1). Distances run up to about 9 miles. None of the repair companies near Columbus name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Appliance Lab, around 0.6 miles out. The 34 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.6, 1.0, 1.0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 18 |
| Mention washer work | 10 |
| Appliance repair companies in range (30 mi) | 58 |
| Mention Electrolux | 0 |
| Listing Saturday hours | 41 |
First up for Columbus: Sears Appliance Repair (8.5 miles away, based in Grove City, 4.5 stars from 181 reviews, lists Saturday hours); Appliance Fix Experts (2.1 miles away, 4.7 stars from 54 reviews, lists Saturday hours); Sears Appliance Repair (7.4 miles away, 4.5 stars from 216 reviews, lists Saturday hours); Economic Appliance Service (7.1 miles away, 4.8 stars from 1,841 reviews).
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Common Electrolux Washer Problems
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Columbus Washer Call
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- How old the washer is
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Columbus
City of Columbus Department of Public Utilities, Division of Water, which supplies Columbus, reports hardness of about 120 ppm (roughly 7 grains per gallon); moderately hard. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Water Hardness - City of Columbus, Ohio
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Before You Book in Columbus
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Columbus, OH
Is my Electrolux washer worth repairing?
How do I get rid of a washer mildew smell?
How do I find a technician who knows Electrolux washers?
Do you work for Electrolux?
Other Washer Repair in Columbus
Electrolux Washer Repair in Nearby Cities
Also Serving Towns Around Columbus
The technicians listed for Columbus also cover smaller towns nearby, including Grandview Heights. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.