Most Electrolux washer repairs in Alliance involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Alliance
Our data shows 31 appliance repair companies inside a 30-mile radius of Alliance. 1 of them are based in Alliance itself, and other nearby bases include Youngstown (6), Canton (5), and Akron (4). Distances run up to about 29 miles. Sam's Appliance Repair is the nearest, roughly 1.1 miles from Alliance. No company within 90 miles of Alliance mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 27 businesses.
Companies are shown by relevance and distance from Alliance. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 1.1, 15.0, 15.5 |
|---|---|
| Name washers or washing machines in their listing | 11 |
| Mention Electrolux | 0 |
| Companies within 30 miles | 31 |
| Open on Saturdays (per listing) | 17 |
| With 4.5+ stars and at least 10 reviews | 17 |
First up for Alliance: Myers Appliance, Service and Sales Inc. (19.1 miles away, based in Ravenna, 4.8 stars from 973 reviews, lists Saturday hours); Sam's Appliance Repair (1.1 miles away, 4.9 stars from 1,515 reviews, lists Saturday hours); Sears Appliance Repair (20.6 miles away, based in Tallmadge, 4.5 stars from 185 reviews, lists Saturday hours); Home Appliance Company (22.5 miles away, based in Massillon, 4.7 stars from 402 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Electrolux Washer Symptoms and First Checks
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Electrolux Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Alliance
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Alliance
Most washer calls in Alliance come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Questions to Ask a Alliance Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Alliance, OH
What should I do about a Electrolux error code?
How do I get rid of a washer mildew smell?
How do I find a technician who knows Electrolux washers?
More Washing Machine Repair in Alliance, OH
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.