Most Electrolux washer repairs in Great Neck involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Great Neck, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Great Neck
Our data shows 40 appliance repair companies inside a 30-mile radius of Great Neck. 4 list an address in Great Neck, and other nearby bases include Flushing (7), Bronx (4), and Bayside (3). The farthest listed company is about 7 miles out. None of the repair companies near Great Neck name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Repair Porter - Great Neck, about 0.2 miles away. The 33 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Great Neck. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 27 |
|---|---|
| Mention Electrolux | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Open on Saturdays (per listing) | 46 |
| Three nearest companies, miles away | 0.2, 0.2, 1.2 |
The leading options for Great Neck are Sears Appliance Repair (6.6 miles away, based in Bronx, 4.3 stars from 220 reviews, lists Saturday hours); Dynamic Appliance Repair Inc (6.2 miles away, based in Hollis, 4.3 stars from 57 reviews, lists Saturday hours); Appliance Repair Murray Hill (4.9 miles away, based in Flushing, 5.0 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (3.9 miles away, based in New Hyde Park, 4.6 stars from 112 reviews, lists Saturday hours).
Know Your Electrolux Washer
How Electrolux Washers Are Built
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Common Electrolux Washer Problems
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Great Neck
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Great Neck, NY
Most washer calls in Great Neck come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Before You Book in Great Neck
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Electrolux Washer Repair FAQs: Great Neck, NY
Why won't my washer spin?
Is my Electrolux washer worth repairing?
Do you work for Electrolux?
Why does my Electrolux washer show an error code?
More Washing Machine Repair in Great Neck, NY
Electrolux Washer Repair in Nearby Cities
Electrolux Washer Repair for Towns Near Great Neck
Electrolux washer repair for Kings Point, Great Neck Plaza, and Manhasset is handled by the same companies listed for Great Neck. Each town also has its own washing machine repair page with the nearest companies:
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.