Most Electrolux washer repairs in Savage involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Savage list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Savage
Within 30 miles of Savage there are 40 appliance repair companies in our data. 3 of them are based in Savage itself, and other nearby bases include Minneapolis (6), Eden Prairie (5), and Hopkins (5). The farthest listed company is about 16 miles out. No company within 90 miles of Savage mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Appliance Repair Pro is the nearest, roughly 1.4 miles from Savage. Across 28 rated companies, the average public rating is 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 10 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 21 |
| Mention Electrolux | 0 |
| Distance to the three closest (mi) | 1.4, 1.4, 1.6 |
| Listing Saturday hours | 43 |
| Companies within 30 miles | 60 |
First up for Savage: Appliance Repair Pro (1.4 miles away, 5.0 stars from 500 reviews, lists Saturday hours); AMA Appliance Service (12.1 miles away, based in Hopkins, 5.0 stars from 82 reviews); SERVICE MATTERS Heating & Air & Appliance Repair LLC (10.0 miles away, based in Apple Valley, 4.9 stars from 141 reviews, lists Saturday hours); Sears Appliance Repair (3.8 miles away, based in Burnsville, 4.4 stars from 160 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Electrolux Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
What Gets Fixed on a Savage Washer Call
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Savage, MN
Most washer calls in Savage come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Hiring a Washer Repair Company in Savage
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Savage, MN
What stops a washer from spinning?
Why does my Electrolux washer show an error code?
Which Savage technicians work on Electrolux?
Should I repair or replace my Electrolux washer?
Other Washer Repair in Savage
Electrolux Washer Repair Near Savage
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.