If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Lakeville, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Lakeville
40 repair companies serve Lakeville from within 30 miles. 2 list an address in Lakeville, and the rest are spread across Burnsville (4), Bloomington (4), and Eden Prairie (4). The farthest listed company is about 19 miles out. None of the repair companies near Lakeville name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. West Metro Appliance Repair is the nearest, roughly 2.0 miles from Lakeville. Rated companies nearby average 4.3 stars across 30 businesses.
Companies are shown by relevance and distance from Lakeville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 60 |
|---|---|
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 2.0, 2.1, 4.3 |
| Listing Saturday hours | 44 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Mention washer work | 10 |
Closest matches for Lakeville: Appliance Repair Pro (6.3 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); SERVICE MATTERS Heating & Air & Appliance Repair LLC (5.8 miles away, based in Apple Valley, 4.9 stars from 141 reviews, lists Saturday hours); Super Care Appliance Repair (17.5 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); Sears Appliance Repair (4.9 miles away, based in Burnsville, 4.4 stars from 160 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Electrolux Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- An error code on the display
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Keeping a Electrolux Washer Running
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Lakeville Owners Should Know
Most washer calls in Lakeville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Questions to Ask a Lakeville Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Lakeville, MN
Where is the water under my washer coming from?
Why does my Electrolux washer show an error code?
Is my Electrolux washer worth repairing?
Which Lakeville technicians work on Electrolux?
More Washing Machine Repair in Lakeville, MN
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.