If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Barnstable list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Barnstable MA
15 repair companies serve Barnstable from within 30 miles. The rest are spread across Hyannis (4), New Bedford (4), and East Falmouth (2). The farthest listed company is about 30 miles out. The closest is KAM Appliances, about 2.7 miles away. None of the repair companies near Barnstable name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 15 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 2.7, 3.2, 3.3 |
|---|---|
| Name washers or washing machines in their listing | 7 |
| Companies within 30 miles | 15 |
| With 4.5+ stars and at least 10 reviews | 7 |
| Mention Electrolux | 0 |
| Listing Saturday hours | 9 |
First up for Barnstable: KAM Appliances (2.7 miles away, based in Hyannis, 4.7 stars from 1,272 reviews, lists Saturday hours); Sears Appliance Repair (3.3 miles away, based in Hyannis, 4.5 stars from 125 reviews, lists Saturday hours); Yale Appliance (3.3 miles away, based in Hyannis, 5.0 stars from 168 reviews); Cape Cod Appliance Service (7.2 miles away, based in Sandwich, 4.2 stars from 70 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Signs Your Electrolux Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
What Gets Fixed on a Barnstable Washer Call
Care Electrolux Recommends for Its Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Barnstable Owners Should Know
Most washer calls in Barnstable come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Massachusetts does not issue a separate appliance repair license; running fuel gas piping to appliances and installing their vent piping is gas fitting work that requires a license from the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)
In Massachusetts, you can check a license with the Massachusetts Division of Occupational Licensure eLIPSE license verification portal or report a problem to the Massachusetts Attorney General's Office, Consumer Advocacy and Response Division.
Questions to Ask a Barnstable Washer Technician
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Barnstable, MA
Why does my front-load washer smell?
Which Barnstable technicians work on Electrolux?
Do you work for Electrolux?
More Washing Machine Repair in Barnstable, MA
Electrolux Washer Repair Near Barnstable
Electrolux Washer Repair for Towns Near Barnstable
The technicians listed for Barnstable also cover smaller towns nearby, including East Falmouth. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.