Electrolux owners in Gurnee usually want two things from a repair company: experience with the brand and quick access to parts. The Gurnee list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Gurnee
Our data shows 40 appliance repair companies inside a 30-mile radius of Gurnee. 2 list an address in Gurnee, and the rest are spread across Waukegan (6), Vernon Hills (4), and Lake Zurich (3). The farthest listed company is about 14 miles out. None of the repair companies near Gurnee name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Sears Appliance Repair, around 1.2 miles out. Across 33 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Gurnee. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 15 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Mention Electrolux | 0 |
| Distance to the three closest (mi) | 1.2, 1.3, 3.2 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Open on Saturdays (per listing) | 41 |
At the top of the Gurnee list: JT Services Inc - Expert Appliance & HVAC Repair (14.0 miles away, based in Lake Zurich, 5.0 stars from 857 reviews, lists Saturday hours); A Absolute Appliance Repair (7.3 miles away, based in Mundelein, 4.9 stars from 480 reviews, lists Saturday hours); Sears Appliance Repair (1.2 miles away, 4.5 stars from 448 reviews, lists Saturday hours); AMZ Appliance Repair (14.1 miles away, based in Buffalo Grove, 4.8 stars from 1,072 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
What Gets Fixed on a Gurnee Washer Call
Keeping a Electrolux Washer Running
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Gurnee
Most washer calls in Gurnee come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Gurnee
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Gurnee, IL
How do I get rid of a washer mildew smell?
Why does my Electrolux washer show an error code?
Which Gurnee technicians work on Electrolux?
Is my Electrolux washer worth repairing?
Other Washer Repair in Gurnee
Electrolux Washer Repair Near Gurnee
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.