Whirlpool owners in Gurnee usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Gurnee, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Gurnee IL
Our data shows 40 appliance repair companies inside a 30-mile radius of Gurnee. 2 of them are based in Gurnee itself, and the rest are spread across Waukegan (6), Vernon Hills (4), and Lake Zurich (3). Distances run up to about 14 miles. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Sears Appliance Repair, about 1.2 miles away. The 33 rated companies in range average 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 1.2, 1.3, 3.2 |
|---|---|
| Mention washer work | 15 |
| Listing Saturday hours | 41 |
| Mention Whirlpool | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Repair companies inside 30 miles | 60 |
Closest matches for Gurnee: Whirlpool Appliance Repair (28.5 miles away, based in Chicago, 1.4 stars from 33 reviews, lists Saturday hours); JT Services Inc - Expert Appliance & HVAC Repair (14.0 miles away, based in Lake Zurich, 5.0 stars from 857 reviews, lists Saturday hours); AMZ Appliance Repair (14.1 miles away, based in Buffalo Grove, 4.8 stars from 1,072 reviews, lists Saturday hours); Sears Appliance Repair (1.2 miles away, 4.5 stars from 448 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Whirlpool Washer Symptoms and First Checks
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a Whirlpool Washer Running
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Gurnee
Most washer calls in Gurnee come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Gurnee
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Gurnee, IL
Where is the water under my washer coming from?
Do you work for Whirlpool?
Why does my front-load washer smell?
Related Repair Pages for Gurnee
Whirlpool Washer Repair Near Gurnee
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Gurnee technician bring the right parts.