A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Rexburg, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Rexburg
12 repair companies serve Rexburg from within 60 miles. 3 list an address in Rexburg, and other nearby bases include Idaho Falls (4), Blackfoot (3), and Rigby (2). The farthest listed company is about 59 miles out. Nearest on the list: Walker Appliance & Refrigeration, around 1.9 miles out. None of the repair companies near Rexburg name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 12 rated companies in range average 4.5 stars. Because the nearest shops are farther out, ask each company whether Rexburg is inside its regular service area.
Companies are shown by relevance and distance from Rexburg. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.9, 2.4, 3.9 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 7 |
| Mention Electrolux | 0 |
| Companies within 60 miles | 12 |
| Open on Saturdays (per listing) | 6 |
| Mention washer work | 3 |
At the top of the Rexburg list: Making Mends Appliance Repair & Rentals (2.4 miles away, 4.9 stars from 59 reviews); Sears Appliance Repair (25.6 miles away, based in Idaho Falls, 4.7 stars from 209 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (26.6 miles away, based in Idaho Falls, 4.8 stars from 106 reviews, lists Saturday hours); Walker Appliance & Refrigeration (1.9 miles away, 4.4 stars from 47 reviews).
Know Your Electrolux Washer
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
Electrolux Washer Problems Worth a Service Call
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Rexburg
Most washer calls in Rexburg come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Before You Book in Rexburg
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Rexburg, ID
What should I do about a Electrolux error code?
Why is my washer leaking?
Is this Electrolux customer service?
Other Washer Repair in Rexburg
Electrolux Washer Repair Near Rexburg
Electrolux Washer Repair for Towns Near Rexburg
The technicians listed for Rexburg also cover smaller towns nearby, including Rigby. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.