A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Burley, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Burley ID
Our data shows 5 appliance repair companies inside a 60-mile radius of Burley. Other nearby bases include Twin Falls (3), Rupert (1), and American Falls (1). The farthest listed company is about 51 miles out. None of the repair companies near Burley name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Doyle's Appliance Service LLC is the nearest, roughly 5.4 miles from Burley. Rated companies nearby average 4.3 stars across 5 businesses. Burley is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Burley. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 60 miles | 5 |
|---|---|
| Mention washer work | 1 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention Electrolux | 0 |
| Distance to the three closest (mi) | 5.4, 31.9, 33.7 |
| Listing Saturday hours | 2 |
At the top of the Burley list: Doyle's Appliance Service LLC (5.4 miles away, based in Rupert, 4.8 stars from 55 reviews); Hartman's Appliance Repair. (31.9 miles away, based in Twin Falls, 4.7 stars from 83 reviews, lists Saturday hours); Wilder Appliance (34.8 miles away, based in Twin Falls, 4.9 stars from 30 reviews); Pro-Tech Service (33.7 miles away, based in Twin Falls, 4.4 stars from 138 reviews).
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Electrolux Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Any error code shown on the display
Local Notes for Burley
Most washer calls in Burley come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Before You Book in Burley
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Burley, ID
Do you work for Electrolux?
Should I repair or replace my Electrolux washer?
Why does my Electrolux washer show an error code?
Related Repair Pages for Burley
Electrolux Washer Repair Near Burley
Nearby Towns Served From Burley
Live outside Burley? The same Electrolux washer repair technicians serve Rupert. See each town's own washing machine repair listings below.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.