A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Anniston, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Anniston
Our data shows 13 appliance repair companies inside a 30-mile radius of Anniston. 4 list an address in Anniston, and the rest are spread across Gadsden (2), Pell City (2), and Jacksonville (1). The closest is BRIAN'S SERVICE CO., about 0.4 miles away. No company within 90 miles of Anniston mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.3 stars across 12 businesses.
Companies are shown by relevance and distance from Anniston. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 13 |
|---|---|
| Name washers or washing machines in their listing | 3 |
| Listing Saturday hours | 9 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 0.4, 1.4, 4.9 |
| With 4.5+ stars and at least 10 reviews | 4 |
First up for Anniston: Coopers Appliance (9.4 miles away, based in Eastaboga, 5.0 stars from 13 reviews, lists Saturday hours); Sears Appliance Repair (27.4 miles away, based in Pell City, 4.6 stars from 507 reviews, lists Saturday hours); Sears Appliance Repair (25.0 miles away, based in Gadsden, 4.4 stars from 76 reviews, lists Saturday hours); Haynes Sewing Machine Co (1.4 miles away, 4.4 stars from 39 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
What Makes Electrolux Washer Repairs Different
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
When to Call for Electrolux Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Laundry Notes for Anniston, AL
Most washer calls in Anniston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
In Alabama, you can check a license with the Alabama Plumbers and Gas Fitters Examining Board Individual Licensee Search or report a problem to the Alabama Attorney General's Office, Consumer Interest Division.
Before You Book in Anniston
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Anniston, AL
What should I do about a Electrolux error code?
Is my Electrolux washer worth repairing?
Why won't my washer spin?
Other Washer Repair in Anniston
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.