Most Amana washer repairs in Farmington involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Independent Amana Washer Technicians, Farmington UT
40 repair companies serve Farmington from within 30 miles. 1 list an address in Farmington, and other nearby bases include Salt Lake City (17), Clearfield (3), and Ogden (3). The farthest listed company is about 18 miles out. No company within 90 miles of Farmington mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Dependable Appliance Repair Petroglyph, about 0.1 miles away. Rated companies nearby average 4.6 stars across 27 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Amana | 0 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Mention washer work | 4 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 16 |
| Three nearest companies, miles away | 0.1, 3.7, 3.9 |
The leading options for Farmington are iFiX, LLC (14.0 miles away, based in Riverdale, 4.9 stars from 436 reviews); Eagle Appliance Repair Of Salt Lake City (6.9 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); Baseline Home Maintenance (15.3 miles away, based in Salt Lake City, 5.0 stars from 258 reviews, lists Saturday hours); Western Appliance Solution (15.3 miles away, based in Salt Lake City, 5.0 stars from 82 reviews).
Amana Washer Lines Technicians Work On
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana Washer Symptoms and First Checks
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- An error code on the display
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Farmington
Care Amana Recommends for Its Washers
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Budgeting for a Amana Washer Repair
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Farmington
Most washer calls in Farmington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Farmington
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Farmington, UT
Do you work for Amana?
Why does my Amana washer show an error code?
How do I get rid of a washer mildew smell?
Other Washer Repair in Farmington
More Amana Washer Repair Pages Nearby
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.