Most Amana washer repairs in Centerville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Centerville, with those that mention Amana first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Centerville
We found 40 appliance repair companies within 30 miles of Centerville. 2 of them are based in Centerville itself, and the rest are spread across Salt Lake City (20), South Salt Lake (4), and Clearfield (3). The farthest listed company is about 15 miles out. Centerville Aveltrix Appliance Repair is the nearest, roughly 0.5 miles from Centerville. No company within 90 miles of Centerville mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 29 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 15 |
|---|---|
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 43 |
| Name washers or washing machines in their listing | 4 |
| Three nearest companies, miles away | 0.5, 0.6, 3.1 |
| Mention Amana | 0 |
The leading options for Centerville are Quality Appliance Service (14.8 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair Of Salt Lake City (3.1 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); Baseline Home Maintenance (11.3 miles away, based in Salt Lake City, 5.0 stars from 258 reviews, lists Saturday hours); Western Appliance Solution (11.4 miles away, based in Salt Lake City, 5.0 stars from 82 reviews).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Amana Washer
What a Amana Washer Technician Deals With
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Centerville
Most washer calls in Centerville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Centerville
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Centerville, UT
Why does my Amana washer show an error code?
Why is my washer leaking?
Should I repair or replace my Amana washer?
Which Centerville technicians work on Amana?
Related Repair Pages for Centerville
Amana Washer Repair Near Centerville
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.