Most Amana washer repairs in Lebanon involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Lebanon list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Washers Near Lebanon
We found 35 appliance repair companies within 60 miles of Lebanon. The rest are spread across Bristol (3), Rutland (3), and Concord (3). The farthest listed company is about 60 miles out. No company within 90 miles of Lebanon mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: JB's Appliance Repair, around 19.1 miles out. Across 34 rated companies, the average public rating is 4.4 stars. Lebanon is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Lebanon. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Amana | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Listing Saturday hours | 14 |
| Mention washer work | 8 |
| Three nearest companies, miles away | 19.1, 20.7, 23.9 |
| Companies within 60 miles | 35 |
The leading options for Lebanon are Rutland Appliances (36.2 miles away, based in Rutland, 4.8 stars from 566 reviews, lists Saturday hours); Accurate Appliance Repair & Service (35.6 miles away, based in Tilton, 4.8 stars from 42 reviews); Sears Appliance Repair (47.8 miles away, based in Concord, 4.6 stars from 280 reviews, lists Saturday hours); Affiliated Appliance Services. (42.5 miles away, based in Concord, 4.6 stars from 25 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Lebanon Washer Call
Keeping a Amana Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana Washer Repair Cost Ranges
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Lebanon
Most washer calls in Lebanon come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
In New Hampshire, you can check a license with the NH Office of Professional Licensure and Certification License Lookup or report a problem to the New Hampshire Department of Justice, Consumer Protection & Antitrust Bureau.
Questions to Ask a Lebanon Washer Technician
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Lebanon, NH
What should I do about a Amana error code?
Is my Amana washer worth repairing?
How do I get rid of a washer mildew smell?
Is this Amana customer service?
Other Washer Repair in Lebanon
More Amana Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.