Most Amana washer repairs in Claremont involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Claremont NH
We found 39 appliance repair companies within 60 miles of Claremont. 2 list an address in Claremont, and the rest are spread across Manchester (8), Rutland (3), and Concord (3). Distances run up to about 59 miles. None of the repair companies near Claremont name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. JB's Appliance Repair is the nearest, roughly 1.0 miles from Claremont. Across 37 rated companies, the average public rating is 4.2 stars. Claremont is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 60 miles | 39 |
|---|---|
| Mention Amana | 0 |
| Mention washer work | 7 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Listing Saturday hours | 19 |
| Distance to the three closest (mi) | 1.0, 2.6, 17.1 |
The leading options for Claremont are Rutland Appliances (36.5 miles away, based in Rutland, 4.8 stars from 566 reviews, lists Saturday hours); Accurate Appliance Repair & Service (37.6 miles away, based in Tilton, 4.8 stars from 42 reviews); JB's Appliance Repair (1.0 miles away, 4.4 stars from 36 reviews); Sears Appliance Repair (44.0 miles away, based in Concord, 4.6 stars from 280 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Local Notes for Claremont
Most washer calls in Claremont come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
In New Hampshire, you can check a license with the NH Office of Professional Licensure and Certification License Lookup or report a problem to the New Hampshire Department of Justice, Consumer Protection & Antitrust Bureau.
Questions to Ask a Claremont Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
Amana Washer Repair FAQs: Claremont, NH
Which Claremont technicians work on Amana?
Why does my Amana washer show an error code?
How do I get rid of a washer mildew smell?
Other Washer Repair in Claremont
Amana Washer Repair Near Claremont
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Claremont technician bring the right parts.