Most Whirlpool washer repairs in Sienna Plantation involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Sienna Plantation list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Sienna Plantation
Our data shows 40 appliance repair companies inside a 30-mile radius of Sienna Plantation. The rest are spread across Sugar Land (14), Houston (9), and Missouri City (5). Distances run up to about 13 miles. Nearest on the list: Taylor appliances, around 4.2 miles out. No company within 90 miles of Sienna Plantation mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 34 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 4.2, 6.2, 6.5 |
|---|---|
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Mention Whirlpool | 0 |
| Listing Saturday hours | 45 |
| Mention washer work | 19 |
The leading options for Sienna Plantation are Reliant Appliance Repair (10.8 miles away, based in Sugar Land, 5.0 stars from 118 reviews, lists Saturday hours); Sears Appliance Repair (8.8 miles away, based in Pearland, 4.5 stars from 324 reviews, lists Saturday hours); Masterpoint Appliance Repair (12.7 miles away, based in Richmond, 4.9 stars from 441 reviews, lists Saturday hours); Masterminds of Appliances, LLC (11.1 miles away, based in Sugar Land, 4.7 stars from 178 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Says to Check First
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
- An error code on the display
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
What Sienna Plantation Owners Should Know
Most washer calls in Sienna Plantation come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Sienna Plantation
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Whirlpool Washer Repair FAQs: Sienna Plantation, TX
Why is my washer leaking?
Is my Whirlpool washer worth repairing?
Which Sienna Plantation technicians work on Whirlpool?
Why won't my washer spin?
More Washing Machine Repair in Sienna Plantation, TX
More Whirlpool Washer Repair Pages Nearby
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Sienna Plantation technician bring the right parts.