Whirlpool owners in Haltom City usually want two things from a repair company: experience with the brand and quick access to parts. The Haltom City list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Haltom City
Our data shows 40 appliance repair companies inside a 30-mile radius of Haltom City. 3 list an address in Haltom City, and the rest are spread across Fort Worth (20), Hurst (5), and Keller (3). The farthest listed company is about 8 miles out. No company within 30 miles of Haltom City names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Prime Haltom City Appliance Repair, around 1.3 miles out. The 30 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Haltom City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 0 |
|---|---|
| Distance to the three closest (mi) | 1.3, 1.9, 1.9 |
| Open on Saturdays (per listing) | 42 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Name washers or washing machines in their listing | 13 |
| Repair companies inside 30 miles | 60 |
At the top of the Haltom City list: Fast Whirlpool Appliance Repair (36.0 miles away, based in Garland, 4.3 stars from 35 reviews, lists Saturday hours); Guinco Service Appliance Repair (2.9 miles away, based in Richland Hills, 4.7 stars from 2,159 reviews); Mr. Appliance of Hurst-Euless-Bedford (6.6 miles away, based in Bedford, 4.9 stars from 204 reviews, lists Saturday hours); Superior Appliances Repair of Fort Worth (6.4 miles away, based in Fort Worth, 4.7 stars from 228 reviews, lists Saturday hours).
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Common Whirlpool Washer Problems
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Around Haltom City
Most washer calls in Haltom City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Haltom City
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Whirlpool Washer Repair FAQs: Haltom City, TX
Why is my washer leaking?
Is this Whirlpool customer service?
What stops a washer from spinning?
Other Washer Repair in Haltom City
Whirlpool Washer Repair Near Haltom City
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.