A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Greenville, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Whirlpool Washer Repair Near Greenville
Within 30 miles of Greenville there are 21 appliance repair companies in our data. 1 of them are based in Greenville itself, and the rest are spread across Rockwall (5), Wylie (3), and Caddo Mills (2). Distances run up to about 30 miles. No company within 30 miles of Greenville names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. LCH Equipment Services llc is the nearest, roughly 6.7 miles from Greenville. Across 17 rated companies, the average public rating is 4.7 stars.
Companies are shown by relevance and distance from Greenville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 11 |
|---|---|
| Repair companies inside 30 miles | 21 |
| Mention washer work | 4 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 6.7, 6.8, 8.0 |
The leading options for Greenville are Fast Whirlpool Appliance Repair (34.4 miles away, based in Garland, 4.3 stars from 35 reviews, lists Saturday hours); Texas True Appliance Repair (29.4 miles away, based in McKinney, 4.9 stars from 430 reviews, lists Saturday hours); Appliance Fix Experts (24.3 miles away, based in Rockwall, 4.7 stars from 67 reviews, lists Saturday hours); Elite Appliance Solutions - Rockwall (25.7 miles away, based in Rockwall, 4.7 stars from 182 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Whirlpool Washer Symptoms and First Checks
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Greenville
Keeping a Whirlpool Washer Running
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Greenville, TX
Most washer calls in Greenville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Greenville
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Greenville, TX
Is my Whirlpool washer worth repairing?
Is this Whirlpool customer service?
Why does my front-load washer smell?
Other Washer Repair in Greenville
Whirlpool Washer Repair in Nearby Cities
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Greenville technician bring the right parts.