If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Duncanville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Duncanville
We found 40 appliance repair companies within 30 miles of Duncanville. 1 of them are based in Duncanville itself, and other nearby bases include Dallas (18), Grand Prairie (7), and Arlington (4). Distances run up to about 12 miles. No company within 30 miles of Duncanville names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. Get Some AC Heating LLC is the nearest, roughly 1.3 miles from Duncanville. The 29 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 1.3, 2.7, 2.7 |
|---|---|
| Open on Saturdays (per listing) | 41 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Mention washer work | 10 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention Whirlpool | 0 |
First up for Duncanville: Fast Whirlpool Appliance Repair (24.9 miles away, based in Garland, 4.3 stars from 35 reviews, lists Saturday hours); Appliance Recovery-Appliance Repair (12.0 miles away, based in Grand Prairie, 5.0 stars from 310 reviews, lists Saturday hours); Best Thermador repair service (2.7 miles away, based in Dallas, 4.8 stars from 18 reviews, lists Saturday hours); Two Brothers Appliance (11.3 miles away, based in Arlington, 4.9 stars from 183 reviews, lists Saturday hours).
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Says to Check First
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Duncanville Washer Call
Care Whirlpool Recommends for Its Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Duncanville
Most washer calls in Duncanville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Duncanville Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
Whirlpool Washer Repair FAQs: Duncanville, TX
Why does my Whirlpool washer show an error code?
Why is my washer leaking?
Why does my front-load washer smell?
Related Repair Pages for Duncanville
Whirlpool Washer Repair in Nearby Cities
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Duncanville technician bring the right parts.