If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Allen TX
We found 40 appliance repair companies within 30 miles of Allen. 3 list an address in Allen, and the rest are spread across McKinney (16), Plano (14), and Frisco (7). Distances run up to about 9 miles. Nearest on the list: Allen Appliance Repair Tech, around 0.4 miles out. No company within 30 miles of Allen names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 33 rated companies, the average public rating is 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name washers or washing machines in their listing | 21 |
|---|---|
| Three nearest companies, miles away | 0.4, 2.7, 3.1 |
| Appliance repair companies in range (30 mi) | 60 |
| Open on Saturdays (per listing) | 48 |
| Mention Whirlpool | 1 |
| With 4.5+ stars and at least 10 reviews | 31 |
The leading options for Allen are Fast Whirlpool Appliance Repair (11.5 miles away, based in Garland, 4.3 stars from 35 reviews, lists Saturday hours); Texas True Appliance Repair (6.0 miles away, based in McKinney, 4.9 stars from 430 reviews, lists Saturday hours); ThumbUp Pro Appliance Repair (3.2 miles away, based in McKinney, 4.9 stars from 247 reviews, lists Saturday hours); START Appliance repair (5.7 miles away, based in Plano, 4.9 stars from 44 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Allen
Owner Care for Whirlpool Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Laundry Notes for Allen, TX
Most washer calls in Allen come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Allen
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Allen, TX
Why is my washer leaking?
Why does my front-load washer smell?
Is my Whirlpool washer worth repairing?
Is this Whirlpool customer service?
Related Repair Pages for Allen
Whirlpool Washer Repair Near Allen
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.