Most Whirlpool washer repairs in Conway involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Washer Technicians, Conway SC
Our data shows 37 appliance repair companies inside a 30-mile radius of Conway. 4 of them are based in Conway itself, and other nearby bases include Myrtle Beach (17), North Myrtle Beach (5), and Little River (3). The farthest listed company is about 28 miles out. Nearest on the list: Sears Appliance Repair, around 1.4 miles out. None of the repair companies near Conway name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 35 rated companies, the average public rating is 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 20 |
|---|---|
| Name washers or washing machines in their listing | 7 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Three nearest companies, miles away | 1.4, 1.9, 5.6 |
| Companies within 30 miles | 37 |
| Mention Whirlpool | 0 |
Closest matches for Conway: SC Appliance Repair (14.9 miles away, based in Myrtle Beach, 4.9 stars from 732 reviews, lists Saturday hours); Appliance Defiance (20.5 miles away, based in North Myrtle Beach, 4.9 stars from 143 reviews); Sears Appliance Repair (1.4 miles away, 4.5 stars from 173 reviews, lists Saturday hours); Sears Appliance Repair (18.0 miles away, based in Loris, 4.7 stars from 92 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Common Whirlpool Washer Problems
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- An error code on the display
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Conway
Most washer calls in Conway come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Hiring a Washer Repair Company in Conway
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Whirlpool Washer Repair FAQs: Conway, SC
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Do you work for Whirlpool?
Other Washer Repair in Conway
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.