A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Johnstown
We found 40 appliance repair companies within 60 miles of Johnstown. 3 list an address in Johnstown, and the rest are spread across Altoona (4), Duncansville (2), and Greensburg (2). The farthest listed company is about 49 miles out. The closest is R & R Appliance Parts and Repair LLC, about 1.3 miles away. None of the repair companies near Johnstown name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 36 rated companies in range average 4.1 stars. Johnstown is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Johnstown. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 20 |
|---|---|
| Distance to the three closest (mi) | 1.3, 3.6, 5.1 |
| Mention Whirlpool | 0 |
| Repair companies inside 60 miles | 60 |
| Listing Saturday hours | 43 |
| Name washers or washing machines in their listing | 14 |
The leading options for Johnstown are Sears Appliance Repair (5.1 miles away, 4.2 stars from 55 reviews, lists Saturday hours); Thomas Appliance Repair, (3.6 miles away, 2.7 stars from 18 reviews, lists Saturday hours); Martin Appliance (34.7 miles away, based in Altoona, 4.9 stars from 727 reviews, lists Saturday hours); Sears Appliance Repair (28.5 miles away, based in Altoona, 4.2 stars from 40 reviews, lists Saturday hours).
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- An error code on the display
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Johnstown
Owner Care for Whirlpool Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Johnstown, PA
Most washer calls in Johnstown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
In Pennsylvania, you can check a license with the PA Office of Attorney General Home Improvement Contractor Registration Search or report a problem to the Pennsylvania Office of Attorney General.
Questions to Ask a Johnstown Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Johnstown, PA
Why is my washer leaking?
What stops a washer from spinning?
Do you work for Whirlpool?
Is my Whirlpool washer worth repairing?
Related Repair Pages for Johnstown
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.