Most Whirlpool washer repairs in Merrick involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Merrick list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Whirlpool Washer Repair Near Merrick
40 repair companies serve Merrick from within 30 miles. 1 list an address in Merrick, and other nearby bases include Hempstead (7), Freeport (6), and Rockville Centre (3). None of the repair companies near Merrick name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Appliance Repair Merrick, about 0.9 miles away. Across 29 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Merrick. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 12 |
|---|---|
| Open on Saturdays (per listing) | 40 |
| Name washers or washing machines in their listing | 11 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 0.9, 1.0, 1.0 |
| Repair companies inside 30 miles | 60 |
At the top of the Merrick list: PROGRESS SERVICE, INC (6.2 miles away, based in West Hempstead, 4.6 stars from 69 reviews); Appliance Repair Merrick (0.9 miles away, 4.3 stars from 6 reviews, lists Saturday hours); Appliance Repair Roosevelt (2.8 miles away, based in Roosevelt, 4.0 stars from 4 reviews, lists Saturday hours); Harp Home Services (1.2 miles away, based in Bellmore, 2.8 stars from 33 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
What Whirlpool Says to Check First
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Merrick
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
What Merrick Owners Should Know
Most washer calls in Merrick come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Questions to Ask a Merrick Washer Technician
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Merrick, NY
Why does my Whirlpool washer show an error code?
Should I repair or replace my Whirlpool washer?
Why is my washer leaking?
What stops a washer from spinning?
Related Repair Pages for Merrick
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.