A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Gloversville
30 repair companies serve Gloversville from within 30 miles. 2 list an address in Gloversville, and other nearby bases include Schenectady (12), Amsterdam (3), and Scotia (2). The farthest listed company is about 30 miles out. No company within 90 miles of Gloversville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Adirondack Grill Doctor is the nearest, roughly 0.4 miles from Gloversville. The 16 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Gloversville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 30 |
|---|---|
| Mention washer work | 5 |
| Three nearest companies, miles away | 0.4, 1.3, 10.6 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Listing Saturday hours | 17 |
| Mention Whirlpool | 0 |
The leading options for Gloversville are North Country Appliance Repair, LLC (1.3 miles away, 5.0 stars from 21 reviews); Mr. Appliance of Clifton Park (28.2 miles away, based in Ballston Spa, 4.9 stars from 1,422 reviews); DADs Appliance Repair and More (10.9 miles away, based in Hagaman, 4.9 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (24.6 miles away, based in Schenectady, 4.5 stars from 116 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Gloversville Owners Should Know
Most washer calls in Gloversville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Questions to Ask a Gloversville Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Gloversville, NY
Which Gloversville technicians work on Whirlpool?
Why won't my washer spin?
Why does my Whirlpool washer show an error code?
Why does my front-load washer smell?
Related Repair Pages for Gloversville
Whirlpool Washer Repair Near Gloversville
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.