If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Kennett, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Kennett MO
Within 60 miles of Kennett there are 24 appliance repair companies in our data. 1 list an address in Kennett, and the rest are spread across Paragould (2), Poplar Bluff (2), and Jonesboro (2). Distances run up to about 59 miles. Of those, 1 mentions Whirlpool by name. Sears Appliance Repair is the nearest, roughly 0.7 miles from Kennett. The 22 rated companies in range average 4.4 stars. Kennett is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 12 |
|---|---|
| Mention Whirlpool | 1 |
| Appliance repair companies in range (60 mi) | 24 |
| Three nearest companies, miles away | 0.7, 22.8, 23.5 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Name washers or washing machines in their listing | 8 |
The leading options for Kennett are Sears Appliance Repair (0.7 miles away, 4.0 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (22.8 miles away, based in Blytheville, 4.4 stars from 25 reviews, lists Saturday hours); Mr. Appliance of Poplar Bluff, Cape Girardeau and Farmington (44.7 miles away, based in Poplar Bluff, 4.9 stars from 551 reviews); Sears Appliance Repair (23.5 miles away, based in Malden, 4.9 stars from 27 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Common Whirlpool Washer Problems
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- An error code on the display
What Gets Fixed on a Kennett Washer Call
Owner Care for Whirlpool Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Laundry Notes for Kennett, MO
Most washer calls in Kennett come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
How to Choose a Washing Machine Technician Near Kennett
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Kennett, MO
Where is the water under my washer coming from?
Why does my front-load washer smell?
Why does my Whirlpool washer show an error code?
More Washing Machine Repair in Kennett, MO
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.