A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Jennings, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Jennings
Our data shows 40 appliance repair companies inside a 30-mile radius of Jennings. Other nearby bases include St. Louis (22), Hazelwood (3), and Florissant (3). Distances run up to about 12 miles. No company within 90 miles of Jennings mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Fix Experts, about 3.0 miles away. Rated companies nearby average 4.0 stars across 27 businesses.
Companies are shown by relevance and distance from Jennings. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 14 |
| Distance to the three closest (mi) | 3.0, 3.3, 3.4 |
| Companies within 30 miles | 60 |
| Mention washer work | 14 |
| Listing Saturday hours | 43 |
Closest matches for Jennings: All American Appliance and HVAC Services (5.2 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); Hoffmann Brothers (8.0 miles away, based in Brentwood, 4.9 stars from 11,938 reviews, lists Saturday hours); Hoffmann Brothers (9.3 miles away, based in St. Louis, 4.9 stars from 6,545 reviews, lists Saturday hours); Hoffmann Brothers (7.2 miles away, based in St. Louis, 4.9 stars from 5,162 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
Whirlpool Washer Symptoms and First Checks
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Keeping a Whirlpool Washer Running
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Jennings
Most washer calls in Jennings come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in Jennings
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Jennings, MO
How do I get rid of a washer mildew smell?
Is this Whirlpool customer service?
How do I find a technician who knows Whirlpool washers?
Where is the water under my washer coming from?
Related Repair Pages for Jennings
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.