If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Hillcrest Heights, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Hillcrest Heights MD
Within 30 miles of Hillcrest Heights there are 40 appliance repair companies in our data. 2 list an address in Hillcrest Heights, and other nearby bases include Washington (20), Arlington (5), and Alexandria (4). Nifty Lifty Appliance Repair is the nearest, roughly 0.9 miles from Hillcrest Heights. None of the repair companies near Hillcrest Heights name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 33 rated companies, the average public rating is 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Whirlpool | 0 |
|---|---|
| Name washers or washing machines in their listing | 12 |
| Open on Saturdays (per listing) | 41 |
| Repair companies inside 30 miles | 60 |
| Three nearest companies, miles away | 0.9, 2.3, 2.7 |
| Rated 4.5 stars or higher (10+ reviews) | 17 |
First up for Hillcrest Heights: SK Appliance Repair (3.0 miles away, based in Camp Springs, 5.0 stars from 404 reviews, lists Saturday hours); UltraFix Appliance Repair (4.6 miles away, based in Alexandria, 4.9 stars from 696 reviews, lists Saturday hours); GLS Appliance & HVAC Repair (6.4 miles away, based in Arlington, 4.9 stars from 38 reviews, lists Saturday hours); Sears Appliance Repair (4.2 miles away, based in Forestville, 4.2 stars from 420 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Care Whirlpool Recommends for Its Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Hillcrest Heights
Most washer calls in Hillcrest Heights come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Before You Book in Hillcrest Heights
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: Hillcrest Heights, MD
Which Hillcrest Heights technicians work on Whirlpool?
What stops a washer from spinning?
Where is the water under my washer coming from?
Related Repair Pages for Hillcrest Heights
Whirlpool Washer Repair Near Hillcrest Heights
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.