If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Edgemere
Our data shows 40 appliance repair companies inside a 30-mile radius of Edgemere. The rest are spread across Baltimore (19), Parkville (4), and Glen Burnie (3). The closest is Landers-Atlas Appliance Services Inc, about 4.3 miles away. No company within 90 miles of Edgemere mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 36 rated companies in range average 4.1 stars.
Companies are shown by relevance and distance from Edgemere. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Mention washer work | 16 |
| Open on Saturdays (per listing) | 39 |
| Three nearest companies, miles away | 4.3, 5.1, 7.5 |
| Repair companies inside 30 miles | 60 |
The leading options for Edgemere are Landers Appliance (7.5 miles away, based in Baltimore, 4.9 stars from 2,398 reviews); Sears Appliance Repair (10.0 miles away, based in Glen Burnie, 4.2 stars from 908 reviews, lists Saturday hours); Sears Appliance Repair (10.2 miles away, based in Baltimore, 4.5 stars from 869 reviews, lists Saturday hours); Dr Appliance Repair - Pasadena (9.3 miles away, based in Pasadena, 5.0 stars from 18 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Edgemere
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Edgemere
Most washer calls in Edgemere come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Questions to Ask a Edgemere Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Edgemere, MD
Is my Whirlpool washer worth repairing?
Why is my washer leaking?
Why does my front-load washer smell?
Related Repair Pages for Edgemere
Whirlpool Washer Repair Near Edgemere
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.