A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Wilmette, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Wilmette IL
40 repair companies serve Wilmette from within 30 miles. 2 of them are based in Wilmette itself, and the rest are spread across Evanston (10), Skokie (8), and Glenview (5). The farthest listed company is about 6 miles out. Nearest on the list: Kelly's Appliance Repair Services, around 1.1 miles out. No company within 30 miles of Wilmette names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 36 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Wilmette. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 50 |
|---|---|
| Companies within 30 miles | 60 |
| Mention Whirlpool | 0 |
| Three nearest companies, miles away | 1.1, 1.2, 1.6 |
| Mention washer work | 22 |
| With 4.5+ stars and at least 10 reviews | 23 |
At the top of the Wilmette list: Whirlpool Appliance Repair (9.5 miles away, based in Chicago, 1.4 stars from 33 reviews, lists Saturday hours); UltraFix Appliance Repair (3.5 miles away, based in Glenview, 4.8 stars from 855 reviews, lists Saturday hours); Smart Appliance Repair & Service (2.7 miles away, based in Winnetka, 5.0 stars from 202 reviews, lists Saturday hours); A Plus Appliance Repair Inc (3.5 miles away, based in Skokie, 4.9 stars from 418 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
Common Whirlpool Washer Problems
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Local Notes for Wilmette
Most washer calls in Wilmette come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Hiring a Washer Repair Company in Wilmette
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Wilmette, IL
Why is my washer leaking?
Should I repair or replace my Whirlpool washer?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
More Washing Machine Repair in Wilmette, IL
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.