A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Greenville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Greenville
40 repair companies serve Greenville from within 60 miles. 1 list an address in Greenville, and other nearby bases include Belleville (4), Alton (4), and St. Louis (4). No company within 90 miles of Greenville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Shaw's Appliance Sales & Services, about 1.3 miles away. The 31 rated companies in range average 4.1 stars. Greenville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Greenville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 1.3, 18.6, 18.7 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 14 |
| Listing Saturday hours | 38 |
| Mention Whirlpool | 0 |
| Appliance repair companies in range (60 mi) | 60 |
| Mention washer work | 10 |
The leading options for Greenville are Liberty Appliance & Repair (29.6 miles away, based in Salem, 4.7 stars from 139 reviews, lists Saturday hours); Mr. Appliance of Mid America (38.4 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours); Sears Appliance Repair (37.7 miles away, based in Fairview Heights, 4.3 stars from 242 reviews, lists Saturday hours); Hoffmann Brothers (32.2 miles away, based in Edwardsville, 4.9 stars from 5,567 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water left in the drum after the cycle
- An error code on the display
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Greenville Washer Call
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Greenville, IL
Most washer calls in Greenville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
How to Choose a Washing Machine Technician Near Greenville
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Greenville, IL
Which Greenville technicians work on Whirlpool?
Is this Whirlpool customer service?
Why does my front-load washer smell?
Other Washer Repair in Greenville
Whirlpool Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.