If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Burr Ridge, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Burr Ridge
We found 40 appliance repair companies within 30 miles of Burr Ridge. 1 of them are based in Burr Ridge itself, and other nearby bases include Darien (6), Downers Grove (3), and Brookfield (3). The farthest listed company is about 7 miles out. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Willowbrook Appliance Repair, around 1.3 miles out. The 37 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Burr Ridge. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 9 |
|---|---|
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 1.3, 1.4, 2.2 |
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Open on Saturdays (per listing) | 33 |
Closest matches for Burr Ridge: Whirlpool Appliance Repair (15.6 miles away, based in Chicago, 1.4 stars from 33 reviews, lists Saturday hours); Chicago Appliance Repair Doctor (2.5 miles away, based in Darien, 5.0 stars from 296 reviews, lists Saturday hours); Sears Appliance Repair (7.4 miles away, based in Chicago Ridge, 4.3 stars from 894 reviews, lists Saturday hours); Sears Appliance Repair (7.3 miles away, based in Oak Brook, 4.6 stars from 315 reviews, lists Saturday hours).
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Says to Check First
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
What Burr Ridge Owners Should Know
Most washer calls in Burr Ridge come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Hiring a Washer Repair Company in Burr Ridge
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Whirlpool Washer Repair FAQs: Burr Ridge, IL
How do I find a technician who knows Whirlpool washers?
Is this Whirlpool customer service?
What should I do about a Whirlpool error code?
What stops a washer from spinning?
Related Repair Pages for Burr Ridge
Whirlpool Washer Repair Near Burr Ridge
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.