If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Anna list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Anna IL
Our data shows 22 appliance repair companies inside a 60-mile radius of Anna. 1 of them are based in Anna itself, and other nearby bases include Paducah (7), Marion (2), and Carbondale (1). Distances run up to about 59 miles. 1 of them mentions Whirlpool in their listing or website. Nearest on the list: Riley'sl,., around 1.3 miles out. The 21 rated companies in range average 4.2 stars. Anna is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Companies within 60 miles | 22 |
| Listing Saturday hours | 13 |
| Name washers or washing machines in their listing | 7 |
| Distance to the three closest (mi) | 1.3, 18.9, 20.4 |
| Mention Whirlpool | 1 |
At the top of the Anna list: Sears Appliance Repair (20.4 miles away, based in Cape Girardeau, 4.5 stars from 146 reviews, lists Saturday hours); Appliance Wizard (25.8 miles away, based in Marion, 4.8 stars from 1,351 reviews, lists Saturday hours); Sears Appliance Repair (40.0 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Appliance Help Center (38.3 miles away, based in Paducah, 4.4 stars from 65 reviews).
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a Whirlpool Washer Running
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Local Notes for Anna
Most washer calls in Anna come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Hiring a Washer Repair Company in Anna
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Anna, IL
What should I do about a Whirlpool error code?
Why does my front-load washer smell?
Is my Whirlpool washer worth repairing?
Why won't my washer spin?
More Washing Machine Repair in Anna, IL
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.