Serving Chippewa Falls, Wisconsin and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Chippewa Falls, WI

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Chippewa Falls.

Need washer repair in Chippewa Falls?
Tell us the brand and the problem and we will connect you with a technician near Chippewa Falls.
☎(866) 293-4411
✓12 companies listed for Chippewa Falls✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Chippewa Falls, sorted by how closely they match washing machine work, then by distance and public ratings.

Who Repairs Washers Near Chippewa Falls

We found 14 appliance repair companies within 60 miles of Chippewa Falls. Other nearby bases include Eau Claire (7), Bloomer (2), and Elk Mound (1). Distances run up to about 58 miles. 1 lists washing machine or washer work specifically. The closest is Justin Wallace Appliance Services, about 10.0 miles away. The 11 rated companies in range average 4.4 stars. Chippewa Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
4720 Golf Rd, Eau Claire, WI 54701
11.5 mi from Chippewa Falls
★★★★½ 4.5 (122 reviews)
Mentions washersSaturday hours
Appliance Repair
Amundson's Appliance Center
2950 Mall Dr, Eau Claire, WI 54701
10.8 mi from Chippewa Falls
★★★★ 4.0 (118 reviews)
Saturday hours
Appliance Repair
River City Appliance Care LLC
1101 W Clairemont Ave Ste 2H3, Eau Claire, WI 54703
11.7 mi from Chippewa Falls
★★★★★ 5.0 (24 reviews)
Appliance Repair
Appliance Service Company
2504 London Rd, Eau Claire, WI 54701
10.5 mi from Chippewa Falls
★★★★½ 4.6 (97 reviews)
Appliance Repair
Mohrs T V Appliance & Antenna Services
16747 Co Hwy F, Bloomer, WI 54724
11.4 mi from Chippewa Falls
★★★★★ 5.0 (13 reviews)
Saturday hours
Appliance Repair
R&R Appliance Service LLC
5642 34th St, Elk Mound, WI 54739
10.6 mi from Chippewa Falls
★★★★★ 5.0 (11 reviews)
Appliance Repair
Butch's Appliance Services LLC
2005 Hanson St, Bloomer, WI 54724
12.0 mi from Chippewa Falls
★★★★★ 4.9 (12 reviews)
Appliance Repair
Young Appliance Repair Experts
3210 London Rd, Eau Claire, WI 54701
11.0 mi from Chippewa Falls
★★★½ 3.7 (7 reviews)
Saturday hours
Appliance Repair
Justin Wallace Appliance Services
101 N Barstow St Suite 212, Eau Claire, WI 54703
10.0 mi from Chippewa Falls
Appliance Repair
Gray's Appliance Service, LLC
W275 Co Rd Z, Mondovi, WI 54755
31.8 mi from Chippewa Falls
★★★★★ 5.0 (7 reviews)
Appliance Repair
ASC1, Inc
3210 London Rd, Eau Claire, WI 54701
11.0 mi from Chippewa Falls
Appliance Repair
Service Specialist
N13462 Gorman Ave, Thorp, WI 54771
30.9 mi from Chippewa Falls
★★★ 3.1 (20 reviews)
Saturday hours

Companies are shown by relevance and distance from Chippewa Falls. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Chippewa Falls, WI
Appliance repair companies in range (60 mi)14
Name washers or washing machines in their listing1
Three nearest companies, miles away10.0, 10.5, 10.6
Mention a major washer brand0
Open on Saturdays (per listing)6
Rated 4.5 stars or higher (10+ reviews)6

First up for Chippewa Falls: Sears Appliance Repair (11.5 miles away, based in Eau Claire, 4.5 stars from 122 reviews, lists Saturday hours); Amundson's Appliance Center (10.8 miles away, based in Eau Claire, 4.0 stars from 118 reviews, lists Saturday hours); River City Appliance Care LLC (11.7 miles away, based in Eau Claire, 5.0 stars from 24 reviews); Appliance Service Company (10.5 miles away, based in Eau Claire, 4.6 stars from 97 reviews).

⚡ Get connected with a washer technician near Chippewa Falls
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Washer fills slowly, will not fill, or keeps filling
  • An error code on the display
  • Washer will not spin, or clothes come out soaking wet

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Chippewa Falls Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with washer smells like mildew or front-load vs top-load washer problems.

If Your Washer Is Leaking

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Chippewa Falls

Most washer calls in Chippewa Falls come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin

In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.

Before You Book in Chippewa Falls

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Chippewa Falls, WI

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Find Your Washer Brand in Chippewa Falls

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Chippewa Falls technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech