Serving Redmond, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Redmond, WA

Washing machine repair from independent technicians serving Redmond, with ratings, distances and what to check before you call.

Talk to a washing machine tech near Redmond
Tell us the brand and the problem and we will connect you with a technician near Redmond.
☎(866) 293-4411
✓12 companies listed for Redmond✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Redmond

Our data shows 40 appliance repair companies inside a 30-mile radius of Redmond. 16 of them are based in Redmond itself, and other nearby bases include Bellevue (13) and Kirkland (11). The farthest listed company is about 5 miles out. 9 list washing machine or washer work specifically. Nearest on the list: Redmond Appliance Repair Tech, around 0.2 miles out. The 32 rated companies in range average 4.7 stars.

Washer & Dryer Repair
GreenFix Appliance Repair LLC
9109 183rd Ct NE, Redmond, WA 98052
1.1 mi from Redmond
★★★★★ 5.0 (141 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Major Appliance Repair
10961 NE 2nd Pl, Bellevue, WA 98004
5.7 mi from Redmond
★★★★★ 4.9 (155 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Eastside Appliance Repair
1012 167th Pl NE, Bellevue, WA 98008
3.9 mi from Redmond
★★★★★ 4.9 (234 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
FixLine Appliance Repair
16595 Redmond Wy #98052, Redmond, WA 98052
0.3 mi from Redmond
★★★★★ 4.9 (120 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Homnice Appliance repair
14500 NE 29th Pl, Bellevue, WA 98007
3.1 mi from Redmond
★★★★★ 5.0 (206 reviews)
Mentions washersSaturday hours
Appliance Repair
Washer Dryer Appliance Repair
15608 NE 59th Way, Redmond, WA 98052
1.6 mi from Redmond
★★★★½ 4.7 (47 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Super Appliance Repair
2018 156th Ave NE Bldg. F Suite 237, Bellevue, WA 98007
3.3 mi from Redmond
★★★★★ 5.0 (116 reviews)
Mentions washers
Washer & Dryer Repair
GR Solution Appliance Repair
12720 NE 180th St Apt I201, Bothell, WA 98011
6.2 mi from Redmond
★★★★★ 4.9 (53 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fixme Appliance Repair Kirkland
12220 108th Ct NE, Kirkland, WA 98034
4.4 mi from Redmond
★★★★★ 5.0 (23 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Service Plus
10710 NE 10th St #610, Bellevue, WA 98004
5.4 mi from Redmond
★★★★½ 4.4 (20 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Fix Experts
4320 150th Ave NE Unit 90, Redmond, WA 98052
2.2 mi from Redmond
★★★★½ 4.7 (15 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Brown Appliance Repair
14700 NE 8th St, Bellevue, WA 98007
4.3 mi from Redmond
★★★★★ 5.0 (1 review)
Mentions washersSaturday hours

Companies are shown by relevance and distance from Redmond. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Redmond, WA
Mention washer work13
Three nearest companies, miles away0.2, 0.2, 0.3
Mention a major washer brand1
Listing Saturday hours40
With 4.5+ stars and at least 10 reviews19
Repair companies inside 30 miles60

At the top of the Redmond list: GreenFix Appliance Repair LLC (1.1 miles away, 5.0 stars from 141 reviews, lists Saturday hours); Major Appliance Repair (5.7 miles away, based in Bellevue, 4.9 stars from 155 reviews, lists Saturday hours); Eastside Appliance Repair (3.9 miles away, based in Bellevue, 4.9 stars from 234 reviews, lists Saturday hours); FixLine Appliance Repair (0.3 miles away, 4.9 stars from 120 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Redmond
☎(866) 293-4411

When to Call for Washer Repair

  • Water left in the drum after the cycle
  • Water on the floor under or in front of the washer
  • Washer will not start or the lid or door stays locked
  • Loud banging, shaking or walking during the spin

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

Inside a Washer Repair Visit

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Redmond

Before replacing a washer in Redmond, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Redmond

Most washer calls in Redmond come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Questions to Ask a Redmond Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If a part has to be ordered, how soon can you come back to finish?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Redmond, WA

Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What should I check before calling?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.

Find Your Washer Brand in Redmond

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Redmond technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech