Serving Brier, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Brier, WA

A local list of washer repair companies near Brier, WA, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in Brier?
Tell us the brand and the problem and we will connect you with a technician near Brier.
☎(866) 293-4411
✓12 companies listed for Brier✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Brier, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Brier list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Brier

We found 40 appliance repair companies within 30 miles of Brier. The rest are spread across Bothell (8), Lynnwood (7), and Edmonds (5). Of those, 9 mention washing machine or washer work by name. HotWire Furnace, Air Conditioning & Appliance Repair Bothell is the nearest, roughly 1.1 miles from Brier. The 31 rated companies in range average 4.8 stars.

Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Bothell
1232 220th Pl SW, Bothell, WA 98021
1.1 mi from Brier
★★★★★ 4.9 (1,493 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
18600 Alderwood Mall Pkwy, Lynnwood, WA 98037
2.6 mi from Brier
★★★★½ 4.7 (413 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Fixers
18114 19th Dr SE, Bothell, WA 98012
4.2 mi from Brier
★★★★★ 4.9 (270 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fast Appliances Repair
5700 154th Pl SW, Edmonds, WA 98026
4.9 mi from Brier
★★★★★ 4.9 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Ace Appliance Service
13022 Ash Way Unit B, Everett, WA 98204
6.1 mi from Brier
★★★★★ 5.0 (322 reviews)
Mentions washers
Washer & Dryer Repair
Orca Appliance Services
16611 48th Ave W Unit A2, Edmonds, WA 98026
4.0 mi from Brier
★★★★★ 4.8 (146 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
GR Solution Appliance Repair
12720 NE 180th St Apt I201, Bothell, WA 98011
5.3 mi from Brier
★★★★★ 4.9 (53 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
15711 Aurora Ave N, Shoreline, WA 98133
4.8 mi from Brier
★★★★½ 4.7 (351 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Same Day Appliances Repair LLC
12115 19th Ave SE, Everett, WA 98208
7.3 mi from Brier
★★★★½ 4.3 (88 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
1 Man Appliance Service and Repair
20323 19th Ave NE, Shoreline, WA 98155
2.0 mi from Brier
★★★★★ 4.8 (34 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fixme Appliance Repair Kirkland
12220 108th Ct NE, Kirkland, WA 98034
6.7 mi from Brier
★★★★★ 5.0 (23 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Super Appliance Repair
11400 Airport Rd Ste 200, Everett, WA 98204
7.1 mi from Brier
★★★★★ 5.0 (7 reviews)
Mentions washers

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Brier
Rated 4.5 stars or higher (10+ reviews)25
Three nearest companies, miles away1.1, 1.4, 2.0
Name washers or washing machines in their listing14
Listing Saturday hours42
Appliance repair companies in range (30 mi)60
Mention a major washer brand1

At the top of the Brier list: HotWire Furnace, Air Conditioning & Appliance Repair Bothell (1.1 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); Sears Appliance Repair (2.6 miles away, based in Lynnwood, 4.7 stars from 413 reviews); Appliance Fixers (4.2 miles away, based in Bothell, 4.9 stars from 270 reviews, lists Saturday hours); Fast Appliances Repair (4.9 miles away, based in Edmonds, 4.9 stars from 116 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Water left in the drum after the cycle
  • Water on the floor under or in front of the washer
  • Burning smell or a motor that hums without turning
  • Washer will not spin, or clothes come out soaking wet

The Usual Washer Culprits in Brier

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What a Washing Machine Technician Checks

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not spinning or washer not draining.

Water, Power and Safety First

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Brier Owners Should Know

Most washer calls in Brier come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Questions to Ask a Brier Washer Technician

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Brier, WA

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
How much does washing machine repair cost in Brier?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Brier

Washing Machine Repair in Nearby Cities

Before you call a Brier technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech