Serving Bridgewater, Virginia and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Bridgewater, VA

A local list of washer repair companies near Bridgewater, VA, sorted by how closely they match the work, then by distance and public ratings.

Washer down in Bridgewater?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Bridgewater✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Bridgewater and the Rockingham County area, with companies that mention washer work shown first.

Who Repairs Washers Near Bridgewater

Our data shows 13 appliance repair companies inside a 30-mile radius of Bridgewater. 2 list an address in Bridgewater, and other nearby bases include Staunton (3), Fishersville (3), and Harrisonburg (1). HomePro Elite Services is the nearest, roughly 0.5 miles from Bridgewater. 2 of them mention washing machine or washer work in their listing or website. Rated companies nearby average 3.9 stars across 11 businesses.

Washer & Dryer Repair
Sears Appliance Repair
2712 W Main St, Waynesboro, VA 22980
21.3 mi from Bridgewater
★★★★½ 4.3 (116 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1206 Greenville Ave, Staunton, VA 24401
18.5 mi from Bridgewater
★★★★ 4.2 (83 reviews)
Mentions washersSaturday hours
Appliance Repair
HomePro Elite Services
27 Chesters Way, Bridgewater, VA 22812
0.5 mi from Bridgewater
★★★★★ 5.0 (30 reviews)
Saturday hours
Appliance Repair
VA Commercial Repair Solutions
1537 Jefferson Hwy, Fishersville, VA 22939
19.5 mi from Bridgewater
★★★★½ 4.6 (152 reviews)
Commercial
Appliance Repair
All Star Appliance Repair llc
814 Judy Lane Extension, Stanley, VA 22851
28.1 mi from Bridgewater
★★★★★ 5.0 (27 reviews)
Appliance Repair
Steve's Appliance Service
57 Shutterlee Mill Ln, Staunton, VA 24401
14.9 mi from Bridgewater
★★★★★ 5.0 (1 review)
Appliance Repair
Grimm Appliance Services
324 Sandstone Cir, Bridgewater, VA 22812
0.6 mi from Bridgewater
★★½ 2.3 (3 reviews)
Appliance Repair
Appliance Repair Tech Harrisonburg
254 Franklin St, Harrisonburg, VA 22801
6.9 mi from Bridgewater
Saturday hours
Appliance Repair
Hobart Sales & Services
33 Tinkling Spring Rd, Fishersville, VA 22939
19.9 mi from Bridgewater
Appliance Repair
Valley Restaurant Repair
36 Lucas Rd, Fishersville, VA 22939
20.7 mi from Bridgewater
★★★★ 3.8 (26 reviews)
Saturday hours
Appliance Repair
Roberts' Appliance Service
903 Bull Run, Staunton, VA 24401
15.4 mi from Bridgewater
★★★★ 4.1 (9 reviews)
Appliance Repair
Matt's Appliance Service Inc
12 Storage Ln, Timberville, VA 22853
19.7 mi from Bridgewater
★★★ 3.1 (174 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Bridgewater repair companies in numbers
Mention a major washer brand0
Open on Saturdays (per listing)5
Distance to the three closest (mi)0.5, 0.6, 6.9
Rated 4.5 stars or higher (10+ reviews)3
Name washers or washing machines in their listing2
Appliance repair companies in range (30 mi)13

The leading options for Bridgewater are Sears Appliance Repair (21.3 miles away, based in Waynesboro, 4.3 stars from 116 reviews, lists Saturday hours); Sears Appliance Repair (18.5 miles away, based in Staunton, 4.2 stars from 83 reviews, lists Saturday hours); HomePro Elite Services (0.5 miles away, 5.0 stars from 30 reviews, lists Saturday hours); VA Commercial Repair Solutions (19.5 miles away, based in Fishersville, 4.6 stars from 152 reviews).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • Washer will not spin, or clothes come out soaking wet
  • Loud banging, shaking or walking during the spin
  • Washer will not start or the lid or door stays locked

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

What a Washing Machine Technician Checks

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not filling with water or washer not draining.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Bridgewater Owners Should Know

Most washer calls in Bridgewater come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Virginia's Board for Contractors has no appliance repair license classification, but its gas fitting contracting specialty covers installing, repairing or removing gas piping and appliances attached to real property. Source: 18VAC50-22-30, Definitions of specialty services

In Virginia, you can check a license with the DPOR License Lookup or report a problem to the Office of the Attorney General of Virginia, Consumer Protection Section.

Hiring a Washer Repair Company in Bridgewater

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Bridgewater, VA

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Washer Repair by Brand in Bridgewater

Washing Machine Repair in Nearby Cities

A clear drain filter, open supply valves and the model number in hand make any washer repair in Bridgewater faster and cheaper.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech