Serving Crystal City, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Crystal City, TX

Washing machine repair from independent technicians serving Crystal City, with ratings, distances and what to check before you call.

Washer down in Crystal City?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓6 companies listed for Crystal City✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Crystal City, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Crystal City list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Crystal City, TX

Within 64 miles of Crystal City there are 8 appliance repair companies in our data. Other nearby bases include Devine (4), Eagle Pass (2), and Hondo (2). The farthest listed company is about 64 miles out. Of those, 1 mentions washing machine or washer work by name. Sears Appliance Repair is the nearest, roughly 39.7 miles from Crystal City. Across 5 rated companies, the average public rating is 4.8 stars. Crystal City is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
410 S Texas, Eagle Pass, TX 78852
39.7 mi from Crystal City
★★★★ 4.0 (8 reviews)
Mentions washersSaturday hours
Appliance Repair
Allen Appliance Repair Team
175 195 Main St, Eagle Pass, TX 78852
41.2 mi from Crystal City
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Top Appliance Repair
220 S Teel Dr, Devine, TX 78016
63.6 mi from Crystal City
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
General Appliance Repair
1905 US-90, Hondo, TX 78861
61.0 mi from Crystal City
★★★★★ 5.0 (1 review)
Appliance Repair
Top Appliance Repair
220 S Teel Dr, Devine, TX 78016
63.6 mi from Crystal City
Saturday hours
Appliance Repair
General Appliance Repair
1905 US-90, Hondo, TX 78861
61.0 mi from Crystal City

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Washer repair near Crystal City at a glance
Companies within 64 miles8
Mention a major washer brand0
Distance to the three closest (mi)39.7, 41.2, 61.0
With 4.5+ stars and at least 10 reviews0
Name washers or washing machines in their listing1
Open on Saturdays (per listing)5

First up for Crystal City: Sears Appliance Repair (39.7 miles away, based in Eagle Pass, 4.0 stars from 8 reviews, lists Saturday hours); Allen Appliance Repair Team (41.2 miles away, based in Eagle Pass, 5.0 stars from 2 reviews, lists Saturday hours); Top Appliance Repair (63.6 miles away, based in Devine, 5.0 stars from 1 reviews, lists Saturday hours); General Appliance Repair (61.0 miles away, based in Hondo, 5.0 stars from 1 reviews).

⚡ Get connected with a washer technician near Crystal City
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning
  • Musty or mildew smell from the drum or door seal

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Crystal City

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not spinning.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Crystal City

Most washer calls in Crystal City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Crystal City

  • What guarantee do you give on parts and labor?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Crystal City, TX

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Find Your Washer Brand in Crystal City

More Washing Machine Repair Pages Nearby

Before you call a Crystal City technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech