Serving Canyon, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Canyon, TX

A local list of washer repair companies near Canyon, TX, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Canyon?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Canyon✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Canyon and the Randall County area, with companies that mention washer work shown first.

Washer Technicians Serving Canyon, TX

We found 17 appliance repair companies within 60 miles of Canyon. Other nearby bases include Amarillo (11), Borger (3), and Plainview (2). The closest is A-Accurate Appliance, about 8.4 miles away. Of those, 4 mention washing machine or washer work by name. The 15 rated companies in range average 4.3 stars. Canyon is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Guerrero's Appliances
605 N Roberts St, Amarillo, TX 79107
16.8 mi from Canyon
★★★★★ 4.8 (375 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1507 W 5th St, Plainview, TX 79072
56.7 mi from Canyon
★★★★½ 4.6 (72 reviews)
Mentions washersSaturday hours
Appliance Repair
J & J Appliance Repair
5300 Goodnight Trail, Amarillo, TX 79109
11.4 mi from Canyon
★★★★½ 4.6 (61 reviews)
Appliance Repair
Black Diamond Appliances
211 N Buchanan St, Amarillo, TX 79107
16.4 mi from Canyon
★★★★★ 5.0 (42 reviews)
Saturday hours
Washer & Dryer Repair
Call Today Appliance Repair
1400 S Cedar St, Borger, TX 79007
54.5 mi from Canyon
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
800 Weatherly St, Borger, TX 79007
56.0 mi from Canyon
★★★★ 4.2 (85 reviews)
Mentions washersSaturday hours
Appliance Repair
Mr. Appliance of Southwest Amarillo
4300 Teckla Blvd Suite 9, Amarillo, TX 79109
12.4 mi from Canyon
★★★★★ 4.9 (125 reviews)
Saturday hours
Appliance Repair
Biggs Service Company
6900 I-40 Ste 180, Amarillo, TX 79106
13.9 mi from Canyon
★★★★ 4.1 (41 reviews)
Saturday hours
Appliance Repair
Amarillo Appliance Repair Experts
4901 Plains Blvd, Amarillo, TX 79106
14.6 mi from Canyon
★★★★½ 4.5 (63 reviews)
Saturday hours
Appliance Repair
A-Accurate Appliance
9811 Besetzny Ln, Amarillo, TX 79119
8.4 mi from Canyon
★★★★½ 4.5 (32 reviews)
Appliance Repair
Circle N Service
2809 Civic Cir, Amarillo, TX 79109
14.3 mi from Canyon
★★ 2.2 (39 reviews)
Appliance Repair
Chennault Appliance A Christian Company
7603 Sombrero Dr, Amarillo, TX 79108
21.2 mi from Canyon
★★★★ 4.0 (7 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Canyon repair companies in numbers
Distance to the three closest (mi)8.4, 11.4, 12.4
Open on Saturdays (per listing)9
Name washers or washing machines in their listing4
Mention a major washer brand0
With 4.5+ stars and at least 10 reviews7
Appliance repair companies in range (60 mi)17

The leading options for Canyon are Guerrero's Appliances (16.8 miles away, based in Amarillo, 4.8 stars from 375 reviews, lists Saturday hours); Sears Appliance Repair (56.7 miles away, based in Plainview, 4.6 stars from 72 reviews, lists Saturday hours); J & J Appliance Repair (11.4 miles away, based in Amarillo, 4.6 stars from 61 reviews); Black Diamond Appliances (16.4 miles away, based in Amarillo, 5.0 stars from 42 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water on the floor under or in front of the washer
  • Washer will not spin, or clothes come out soaking wet
  • Loud banging, shaking or walking during the spin
  • An error code on the display

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Canyon Washer Call

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with washer smells like mildew or washer not filling with water.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Canyon

Before replacing a washer in Canyon, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Canyon

Most washer calls in Canyon come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Canyon

  • How often do you repair your brand washers, and how quickly can you get parts?
  • If a part has to be ordered, how soon can you come back to finish?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Washing Machine Repair FAQs: Canyon, TX

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Brand-Specific Washer Repair, Canyon

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Canyon faster and cheaper.

Get connected with a washer technician near Canyon
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech