Serving Cameron Park, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Cameron Park, TX

A local list of washer repair companies near Cameron Park, TX, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Cameron Park?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Cameron Park✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. This page lists independent appliance repair companies serving Cameron Park and the Cameron County area, with companies that mention washer work shown first.

Washer Technicians Serving Cameron Park, TX

16 repair companies serve Cameron Park from within 30 miles. The rest are spread across Brownsville (8), Harlingen (7), and San Benito (1). Nearest on the list: Sears Appliance Repair, around 2.0 miles out. Of those, 3 mention washing machine or washer work by name. Across 15 rated companies, the average public rating is 4.0 stars.

Washer & Dryer Repair
My Repair Center
1615 S 77 Sunshine Strip, Harlingen, TX 78550
18.8 mi from Cameron Park
★★★★½ 4.7 (1,639 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Plata Refrigeration & Appliance Center
1325 Roosevelt St, Brownsville, TX 78521
4.0 mi from Cameron Park
★★★★ 4.1 (40 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2370 Frontage Rd Ste 2320, Brownsville, TX 78521
2.0 mi from Cameron Park
★★★★½ 4.4 (135 reviews)
Mentions washersSaturday hours
Appliance Repair
GARZA Appliance Service
711 S F St, Harlingen, TX 78550
20.4 mi from Cameron Park
★★★★½ 4.7 (139 reviews)
Appliance Repair
Jim's Appliance & A/C Services
23472 Resaca Rd, San Benito, TX 78586
13.3 mi from Cameron Park
★★★★½ 4.5 (76 reviews)
Appliance Repair
Fixcommercial
2081 Johnson St, Brownsville, TX 78521
4.5 mi from Cameron Park
★★★½ 3.7 (3 reviews)
Commercial
Appliance Repair
Brizza Sales & Services
34 Iturbide St, Brownsville, TX 78521
3.6 mi from Cameron Park
★★★ 2.8 (4 reviews)
Saturday hours
Appliance Repair
H A Perez Appliance Repair
115 Poplar St, Harlingen, TX 78550
23.2 mi from Cameron Park
★★★★½ 4.4 (12 reviews)
Appliance Repair
Appliance Home Solutions
1575 Military Rd 281 ste #207, Brownsville, TX 78520
4.4 mi from Cameron Park
★★★ 3.2 (22 reviews)
Appliance Repair
Carter Appliance Repair
835 E Levee St Ste 200, Brownsville, TX 78520
4.9 mi from Cameron Park
★★★★★ 5.0 (1 review)
Appliance Repair
Danny's Tv Service
1514 E Los Ebanos Blvd, Brownsville, TX 78520
3.0 mi from Cameron Park
Appliance Repair
Ezequiel's Appliance Repair & Service
309 W Tyler Ave, Harlingen, TX 78550
20.4 mi from Cameron Park
★★★★½ 4.3 (44 reviews)
Saturday hours

Companies are shown by relevance and distance from Cameron Park. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Cameron Park repair companies in numbers
Three nearest companies, miles away2.0, 3.0, 3.6
Appliance repair companies in range (30 mi)16
Listing Saturday hours7
Mention washer work3
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)4

At the top of the Cameron Park list: My Repair Center (18.8 miles away, based in Harlingen, 4.7 stars from 1,639 reviews, lists Saturday hours); Plata Refrigeration & Appliance Center (4.0 miles away, based in Brownsville, 4.1 stars from 40 reviews, lists Saturday hours); Sears Appliance Repair (2.0 miles away, based in Brownsville, 4.4 stars from 135 reviews, lists Saturday hours); GARZA Appliance Service (20.4 miles away, based in Harlingen, 4.7 stars from 139 reviews).

⚡ Get connected with a washer technician near Cameron Park
☎(866) 293-4411

Washer Problems Worth a Service Call

  • An error code on the display
  • Washer will not start or the lid or door stays locked
  • Water left in the drum after the cycle
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Cameron Park

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer not spinning or washer not draining.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Cameron Park, TX

Most washer calls in Cameron Park come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

Hiring a Washer Repair Company in Cameron Park

  • Is your company licensed where my state requires it, and insured?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Will you check the drain pump filter and drain hose before replacing the pump?

Washing Machine Repair FAQs: Cameron Park, TX

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Find Your Washer Brand in Cameron Park

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Cameron Park technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech