Serving Belvedere, South Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Belvedere, SC

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Belvedere.

Water sitting in the washer in Belvedere?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Belvedere✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Belvedere, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Belvedere list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Belvedere

We found 26 appliance repair companies within 30 miles of Belvedere. The rest are spread across Augusta (15), Aiken (4), and North Augusta (2). Distances run up to about 16 miles. Of those, 4 mention washing machine or washer work by name. Certified Appliance Repair, LLC is the nearest, roughly 0.4 miles from Belvedere. Across 13 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Beech Island Appliance Service Co.
1576 Sand Bar Ferry Rd, Beech Island, SC 29842
7.9 mi from Belvedere
★★★★★ 4.9 (159 reviews)
Mentions washers
Washer & Dryer Repair
Mr. Appliance of West Augusta
2917 Riverwest Dr, Augusta, GA 30907
5.4 mi from Belvedere
★★★★ 4.1 (735 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
3450B Wrightsboro Rd, Augusta, GA 30909
9.4 mi from Belvedere
★★★★½ 4.5 (46 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1551 Whiskey Rd, Aiken, SC 29803
12.5 mi from Belvedere
★★★★½ 4.4 (26 reviews)
Mentions washersSaturday hours
Appliance Repair
Atomic Tech
1732 Wylds Rd, Augusta, GA 30909
9.3 mi from Belvedere
★★★★★ 4.8 (2,033 reviews)
Appliance Repair
Georgia State Appliance
1011 Beverly Heights Dr, Augusta, GA 30907
6.7 mi from Belvedere
★★★★½ 4.7 (122 reviews)
Saturday hours
Appliance Repair
Rawlins appliance service
419 Vaughn Rd, Martinez, GA 30907
7.4 mi from Belvedere
★★★★½ 4.4 (19 reviews)
Saturday hours
Appliance Repair
Certified Appliance Repair, LLC
352 Edgefield Rd, North Augusta, SC 29841
0.4 mi from Belvedere
★★★★ 4.1 (199 reviews)
Appliance Repair
Hutto HVAC & Duct Clean Service
113 Commercial Ct # A, Augusta, GA 30907
8.8 mi from Belvedere
★★★★ 3.9 (15 reviews)
Appliance Repair
Augusta Appliance Repair Tech
2208 Montclair St, Augusta, GA 30904
7.0 mi from Belvedere
Saturday hours
Appliance Repair
Northstar Appliance Repair
930 Twiggs St, Augusta, GA 30901
5.2 mi from Belvedere
Saturday hours
Appliance Repair
Davis Appliance Repair
4024 Trolley Line Rd, Aiken, SC 29801
11.0 mi from Belvedere
★★★★ 4.2 (118 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Belvedere, SC
Open on Saturdays (per listing)12
Distance to the three closest (mi)0.4, 3.0, 3.3
Mention a major washer brand0
Mention washer work4
With 4.5+ stars and at least 10 reviews4
Appliance repair companies in range (30 mi)26

Closest matches for Belvedere: Beech Island Appliance Service Co. (7.9 miles away, based in Beech Island, 4.9 stars from 159 reviews); Mr. Appliance of West Augusta (5.4 miles away, based in Augusta, 4.1 stars from 735 reviews); Sears Appliance Repair (9.4 miles away, based in Augusta, 4.5 stars from 46 reviews, lists Saturday hours); Sears Appliance Repair (12.5 miles away, based in Aiken, 4.4 stars from 26 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water on the floor under or in front of the washer
  • Water left in the drum after the cycle
  • Musty or mildew smell from the drum or door seal
  • Burning smell or a motor that hums without turning

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What Gets Fixed on a Belvedere Washer Call

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer smells like mildew or washer not filling with water.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Belvedere

Most washer calls in Belvedere come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature

In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.

Hiring a Washer Repair Company in Belvedere

  • If a part has to be ordered, how soon can you come back to finish?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • How often do you repair your brand washers, and how quickly can you get parts?

Washing Machine Repair FAQs: Belvedere, SC

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Brand-Specific Washer Repair, Belvedere

Washing Machine Repair in Nearby Cities

Before you call a Belvedere technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech