Serving Willard, Ohio and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Willard, OH

See which appliance repair companies around Willard work on washing machines, how far away they are and how customers rate them.

Water sitting in the washer in Willard?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Willard✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Willard list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Willard

Within 30 miles of Willard there are 13 appliance repair companies in our data. Other nearby bases include Mansfield (6), Sandusky (2), and Bellevue (1). 3 of them mention washing machine or washer work in their listing or website. The closest is J&C Appliance Repair, about 15.8 miles away. Rated companies nearby average 4.4 stars across 13 businesses.

Washer & Dryer Repair
Mr. Appliance of Ashland and Mansfield
49 S Illinois Ave, Mansfield, OH 44905
23.9 mi from Willard
★★★★½ 4.7 (879 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Fremont and Sandusky, OH
219 S Front St Ste 203C, Fremont, OH 43420
28.7 mi from Willard
★★★★★ 4.8 (347 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4314 Milan Rd, Sandusky, OH 44870
25.5 mi from Willard
★★★ 3.0 (2 reviews)
Mentions washersSaturday hours
Appliance Repair
Pfeiffer's Heating & A/C (Pfeiffer's Appliance)
4645 Laylin Rd, Norwalk, OH 44857
16.7 mi from Willard
★★★★★ 4.8 (34 reviews)
Saturday hours
Appliance Repair
Bucyrus Appliance Repair
301 B S Walnut St, Bucyrus, OH 44820
21.4 mi from Willard
★★★★½ 4.7 (33 reviews)
Saturday hours
Appliance Repair
GRAY'S TV & APPLIANCE
2995 Collins Rd, Collins, OH 44826
19.0 mi from Willard
★★★★★ 5.0 (114 reviews)
Appliance Repair
J&C Appliance Repair
4915 Yingling Rd, Bellevue, OH 44811
15.8 mi from Willard
★★★★½ 4.6 (20 reviews)
Saturday hours
Appliance Repair
Corwin Appliance Service
1319 Beechdale Dr, Mansfield, OH 44907
25.0 mi from Willard
★★★★½ 4.3 (11 reviews)
Appliance Repair
All-Brands-Appliance
141 W Shoreway Dr, Sandusky, OH 44870
27.0 mi from Willard
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Garn Apliance
366 S Diamond St, Mansfield, OH 44902
23.7 mi from Willard
★★★★ 4.0 (4 reviews)
Appliance Repair
Reip's Appliance LLC
605 Springmill St, Mansfield, OH 44903
21.9 mi from Willard
★★★★★ 5.0 (2 reviews)
Appliance Repair
Lewis Appliance Services
555 Taylortown Rd, Mansfield, OH 44903
16.7 mi from Willard
★★★ 3.1 (172 reviews)

Companies are shown by relevance and distance from Willard. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Willard, OH
Name washers or washing machines in their listing3
Rated 4.5 stars or higher (10+ reviews)6
Three nearest companies, miles away15.8, 16.7, 16.7
Listing Saturday hours7
Repair companies inside 30 miles13
Mention a major washer brand0

The leading options for Willard are Mr. Appliance of Ashland and Mansfield (23.9 miles away, based in Mansfield, 4.7 stars from 879 reviews, lists Saturday hours); Mr. Appliance of Fremont and Sandusky, OH (28.7 miles away, based in Fremont, 4.8 stars from 347 reviews, lists Saturday hours); Sears Appliance Repair (25.5 miles away, based in Sandusky, 3.0 stars from 2 reviews, lists Saturday hours); Pfeiffer's Heating & A/C (Pfeiffer's Appliance) (16.7 miles away, based in Norwalk, 4.8 stars from 34 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Willard
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Musty or mildew smell from the drum or door seal
  • Washer will not start or the lid or door stays locked
  • Washer will not spin, or clothes come out soaking wet

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

How a Washer Service Call Usually Goes in Willard

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not spinning.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Willard

Most washer calls in Willard come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form

In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.

How to Choose a Washing Machine Technician Near Willard

  • Can you give a written estimate before ordering parts?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Willard, OH

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Find Your Washer Brand in Willard

Washing Machine Repair in Nearby Cities

Before you call a Willard technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech