Serving Salem, Ohio and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Salem, OH

A local list of washer repair companies near Salem, OH, sorted by how closely they match the work, then by distance and public ratings.

Talk to a washing machine tech near Salem
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Salem✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. The Salem list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Salem, OH

20 repair companies serve Salem from within 30 miles. The rest are spread across Youngstown (6), New Castle (2), and Canton (2). 6 list washing machine or washer work specifically. Nearest on the list: Quality Appliance, around 8.0 miles out. Rated companies nearby average 4.3 stars across 16 businesses.

Washer & Dryer Repair
Mr. Appliance of Youngstown
860 Boardman-Canfield Rd Ste 104A, Youngstown, OH 44512
11.8 mi from Salem
★★★★½ 4.6 (235 reviews)
Mentions washers
Washer & Dryer Repair
Myers Appliance, Service and Sales Inc.
3100 OH-59, Ravenna, OH 44266
28.6 mi from Salem
★★★★★ 4.8 (973 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
5320 Youngstown Rd SE, Niles, OH 44446
21.7 mi from Salem
★★★★½ 4.7 (85 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2100 Niles Cortland Rd SE, Warren, OH 44484
22.0 mi from Salem
★★★★½ 4.6 (145 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2652 Ellwood Rd, New Castle, PA 16101
28.5 mi from Salem
★★★★★ 4.8 (122 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AAA Appliance Service & Parts
1107 Butler Ave, New Castle, PA 16101
28.1 mi from Salem
★★★½ 3.7 (40 reviews)
Mentions washers
Appliance Repair
Sam's Appliance Repair
350 E State St, Alliance, OH 44601
13.1 mi from Salem
★★★★★ 4.9 (1,515 reviews)
Saturday hours
Appliance Repair
Farraghers' Home Appliance Repair Inc
4208 Market St, Boardman, OH 44512
14.3 mi from Salem
★★★★½ 4.5 (119 reviews)
Saturday hours
Appliance Repair
Parc Appliance Repair Company
7639 Connelly Rd, Masury, OH 44438
26.0 mi from Salem
★★★★★ 4.8 (128 reviews)
Appliance Repair
Serenity Home Services
417 E Myrtle Ave, Youngstown, OH 44507
16.4 mi from Salem
★★★★★ 4.8 (94 reviews)
Appliance Repair
Quality Appliance
7509 S Palmyra Rd, Canfield, OH 44406
8.0 mi from Salem
Appliance Repair
C&J Buckeye Appliance Repair
2566 Walnut St, Girard, OH 44420
17.7 mi from Salem
★★★★½ 4.7 (82 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Salem repair companies in numbers
Repair companies inside 30 miles20
Open on Saturdays (per listing)10
Three nearest companies, miles away8.0, 11.8, 12.2
Rated 4.5 stars or higher (10+ reviews)11
Mention washer work6
Mention a major washer brand0

First up for Salem: Mr. Appliance of Youngstown (11.8 miles away, based in Youngstown, 4.6 stars from 235 reviews); Myers Appliance, Service and Sales Inc. (28.6 miles away, based in Ravenna, 4.8 stars from 973 reviews, lists Saturday hours); Sears Appliance Repair (21.7 miles away, based in Niles, 4.7 stars from 85 reviews, lists Saturday hours); Sears Appliance Repair (22.0 miles away, based in Warren, 4.6 stars from 145 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Salem
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Grinding or roaring noise that rises with spin speed
  • Washer fills slowly, will not fill, or keeps filling
  • Musty or mildew smell from the drum or door seal
  • Water left in the drum after the cycle

The Usual Washer Culprits in Salem

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

What Gets Fixed on a Salem Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer smells like mildew or washer not filling with water.

Before Anyone Touches the Washer

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Salem, price the repair. Here is what published cost guides report for common jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Salem

Most washer calls in Salem come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form

In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.

How to Choose a Washing Machine Technician Near Salem

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • Can you give a written estimate before ordering parts?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Salem, OH

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Washer Repair by Brand in Salem

Washing Machine Repair Near Salem

Before you call a Salem technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech