Serving Conneaut, Ohio and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Conneaut, OH

Washing machine repair from independent technicians serving Conneaut, with ratings, distances and what to check before you call.

Need washer repair in Conneaut?
Tell us the brand and the problem and we will connect you with a technician near Conneaut.
☎(866) 293-4411
✓12 companies listed for Conneaut✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Conneaut list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Who Repairs Washers Near Conneaut

Our data shows 14 appliance repair companies inside a 30-mile radius of Conneaut. The rest are spread across Erie (7), Ashtabula (3), and Meadville (2). The farthest listed company is about 30 miles out. Of those, 8 mention washing machine or washer work by name. The closest is J&J-Appliances, about 9.5 miles away. Across 13 rated companies, the average public rating is 4.4 stars.

Washer & Dryer Repair
Duggan's Service & Appliance
3430 Pine Ave, Erie, PA 16504
29.2 mi from Conneaut
★★★★★ 4.8 (1,373 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Mentor
1975 Hubbard Rd, Madison, OH 44057
25.8 mi from Conneaut
★★★★½ 4.7 (591 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7200 Peach St, Erie, PA 16509
26.1 mi from Conneaut
★★★★½ 4.6 (70 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2873 W 26th St, Erie, PA 16506
24.7 mi from Conneaut
★★★★½ 4.6 (111 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Shelatz Appliance Repair
37 Wall St, Jefferson, OH 44047
16.6 mi from Conneaut
★★★★ 4.2 (58 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
800 Millcreek Mall Blvd, Erie, PA 16565
26.1 mi from Conneaut
★★★★½ 4.7 (44 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
16881 Conneaut Lake Rd, Meadville, PA 16335
28.4 mi from Conneaut
★★★★ 4.2 (50 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Beez Appliances - Sales, Service Repair & Parts
916 Parade St, Erie, PA 16503
28.9 mi from Conneaut
★★★½ 3.7 (165 reviews)
Mentions washersSaturday hours
Appliance Repair
J&J-Appliances
1800 Cook Rd, Ashtabula, OH 44004
9.5 mi from Conneaut
★★★½ 3.5 (26 reviews)
Saturday hours
Appliance Repair
Authorized Appliance Services Inc
2227 Wade Ave, Ashtabula, OH 44004
13.2 mi from Conneaut
★★★½ 3.4 (14 reviews)
Appliance Repair
AIS Commercial Parts & Service, Inc.
1911 W 26th St, Erie, PA 16508
26.0 mi from Conneaut
★★★★★ 4.8 (26 reviews)
Commercial
Appliance Repair
Adam Russell Appliance
100 State St #705, Erie, PA 16507
28.4 mi from Conneaut
★★★★★ 5.0 (1 review)

Companies are shown by relevance and distance from Conneaut. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Conneaut, OH
Distance to the three closest (mi)9.5, 10.8, 13.2
Open on Saturdays (per listing)9
With 4.5+ stars and at least 10 reviews6
Name washers or washing machines in their listing8
Appliance repair companies in range (30 mi)14
Mention a major washer brand0

Closest matches for Conneaut: Duggan's Service & Appliance (29.2 miles away, based in Erie, 4.8 stars from 1,373 reviews, lists Saturday hours); Mr. Appliance of Mentor (25.8 miles away, based in Madison, 4.7 stars from 591 reviews, lists Saturday hours); Sears Appliance Repair (26.1 miles away, based in Erie, 4.6 stars from 70 reviews, lists Saturday hours); Sears Appliance Repair (24.7 miles away, based in Erie, 4.6 stars from 111 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Grinding or roaring noise that rises with spin speed
  • Washer will not start or the lid or door stays locked
  • Burning smell or a motor that hums without turning
  • Loud banging, shaking or walking during the spin

Why Washing Machines Break Down

Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What a Washing Machine Technician Checks

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with washer smells like mildew or front-load vs top-load washer problems.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Conneaut, OH

Most washer calls in Conneaut come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form

In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.

Hiring a Washer Repair Company in Conneaut

  • Can you give a written estimate before ordering parts?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Conneaut, OH

Do you cover Conneaut and nearby towns?
The companies on this page are within driving distance of Conneaut. Each one sets its own service area, so check the distance shown and confirm your address when you call.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Washer Repair by Brand in Conneaut

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Conneaut faster and cheaper.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech